-
touchpad tapping mod
This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?
-
Did you try this command in a terminal:
Code:
sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
-
Senior Member
registered user
Greetings was698002 and welcome to the forum.
All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
However, one file, 45knoppix, is owned by root and also executable.
I add a synclient command to this file, at its end, to tweak my touchpad.
This is slightly simpler than adding a new file just for this one tweak.
Quote marks are not necessary for the command.
Of course, you'll need to have persistence working for this to make a permanent
change to your system.
-
SOLVED -thanks
Works fine on 7.7.2 despite the file description as an anachronistic holdover. Never would have found it without you. thanks.
Originally Posted by
utu
Greetings was698002 and welcome to the forum.
All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
However, one file, 45knoppix, is owned by root and also executable.
I add a synclient command to this file, at its end, to tweak my touchpad.
This is slightly simpler than adding a new file just for this one tweak.
Quote marks are not necessary for the command.
Of course, you'll need to have persistence working for this to make a permanent
change to your system.
-
Senior Member
registered user
Originally Posted by
was698002
Works fine on 7.7.2 ... thanks.
Was not aware of 7.7.2, but glad it works for you.
The old forum record harks back to when I thought /etc/rc.local should work, and it didn't.
-
The lack of touchpad support is the one single frustrating thing about Knoppix.
What is persistence mode and how does one achieve it?
Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
-
Originally Posted by
wspc
The lack of touchpad support is the one single frustrating thing about Knoppix. What is persistence mode and how does one achieve it? Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 Blade Server
$39.99
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 256GB H330 2x10Gb X520
$450.00