Results 1 to 7 of 7

Thread: touchpad tapping mod

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    touchpad tapping mod

    This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Did you try this command in a terminal:

    Code:
    sudo leafpad /etc/X11/Xsession.d/15x11-synaptics

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  4. #4
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    SOLVED -thanks

    Works fine on 7.7.2 despite the file description as an anachronistic holdover. Never would have found it without you. thanks.


    Quote Originally Posted by utu View Post
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by was698002 View Post
    Works fine on 7.7.2 ... thanks.
    Was not aware of 7.7.2, but glad it works for you.
    The old forum record harks back to when I thought /etc/rc.local should work, and it didn't.

  6. #6
    Junior Member
    Join Date
    Mar 2012
    Location
    Brisbane, Australia
    Posts
    16
    The lack of touchpad support is the one single frustrating thing about Knoppix.
    What is persistence mode and how does one achieve it?
    Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
    Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?

  7. #7
    Member registered user
    Join Date
    Mar 2010
    Location
    USA
    Posts
    50
    Quote Originally Posted by wspc View Post
    The lack of touchpad support is the one single frustrating thing about Knoppix. What is persistence mode and how does one achieve it? Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
    in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ADAPTEC ASR-7805 6Gbps SAS SATA PCI EXPRESS RAID CONTROLLER CARD Tested/Working picture

ADAPTEC ASR-7805 6Gbps SAS SATA PCI EXPRESS RAID CONTROLLER CARD Tested/Working

$12.50



ADAPTEC ASR-71605 SFF8643 16 PORT SAS SATA 6Gb/s HBA/RAID CARD High Profile picture

ADAPTEC ASR-71605 SFF8643 16 PORT SAS SATA 6Gb/s HBA/RAID CARD High Profile

$35.00



Intel RAID Storage Expander RES2SV240 E91267-203 SAS SATA 6Gb 24 Port US picture

Intel RAID Storage Expander RES2SV240 E91267-203 SAS SATA 6Gb 24 Port US

$69.88



9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US picture

9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US

$52.88



Intel 6Gb/s SAS SATA RAID Controller Card 8-Port PCIe G35828-311 RMS25KB080 picture

Intel 6Gb/s SAS SATA RAID Controller Card 8-Port PCIe G35828-311 RMS25KB080

$12.99



Intel RES2SV240 SAS/SATA 6Gb/s RAID Expander Controller Low-Profile picture

Intel RES2SV240 SAS/SATA 6Gb/s RAID Expander Controller Low-Profile

$44.99



HPe P440ar 749796-001 726738-001 Raid Controller Only - No Cables picture

HPe P440ar 749796-001 726738-001 Raid Controller Only - No Cables

$23.98



For LSI 9240-8i 6Gbps SAS Raid Card ZFS FreeNAS unRAID 2SFF SATA RAID Controller picture

For LSI 9240-8i 6Gbps SAS Raid Card ZFS FreeNAS unRAID 2SFF SATA RAID Controller

$48.99



Dell PowerEdge Raid Controller Battery PERC 5i 6i H700 NU209 picture

Dell PowerEdge Raid Controller Battery PERC 5i 6i H700 NU209

$29.99



HP Smart Array P822 2GB Cache SAS Raid Controller 643379-001 picture

HP Smart Array P822 2GB Cache SAS Raid Controller 643379-001

$22.95