Did you try this command in a terminal:
Code:sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?
Did you try this command in a terminal:
Code:sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
Greetings was698002 and welcome to the forum.
All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
However, one file, 45knoppix, is owned by root and also executable.
I add a synclient command to this file, at its end, to tweak my touchpad.
This is slightly simpler than adding a new file just for this one tweak.
Quote marks are not necessary for the command.
Of course, you'll need to have persistence working for this to make a permanent
change to your system.
The lack of touchpad support is the one single frustrating thing about Knoppix.
What is persistence mode and how does one achieve it?
Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$725.06
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
CSE-118 Supermicro 1U GPU Server 2.6Ghz 28-C 128GB 2x Nvidia K40 GPU 2x1600W PSU
$580.03
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99