Did you try this command in a terminal:
Code:sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?
Did you try this command in a terminal:
Code:sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
Greetings was698002 and welcome to the forum.
All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
However, one file, 45knoppix, is owned by root and also executable.
I add a synclient command to this file, at its end, to tweak my touchpad.
This is slightly simpler than adding a new file just for this one tweak.
Quote marks are not necessary for the command.
Of course, you'll need to have persistence working for this to make a permanent
change to your system.
The lack of touchpad support is the one single frustrating thing about Knoppix.
What is persistence mode and how does one achieve it?
Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99