Results 1 to 2 of 2

Thread: Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!

  1. #1
    Senior Member
    Join Date
    Jan 2012
    Posts
    110

    Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!

    Knop_7.4.2 Folders or Partitions becoming Read_Only by themselves

    Hi

    Does someone explains why and how some folders or partitions occur

    to become "Read_Only" BY THEMSELVES ?

    1- Once this happened after a libreOffice error.

    I had to save all documents and initialize the partition (ReiserFS).

    2- Recently one folder (only one I remarked!) became "Read_Only".

    Impossible to make it "Writable" again BY ANY MEANS!

    So I tried, using GParted,to "shorten one ReiserPartition" and "enlarge"

    another one ReiserPartition.

    These operations took so much time that I had to interrupt them.

    Intrigated by this strange behaviour I looked again integrity of the disk.

    Surprisingly "The bad Folder had gone out" leaving ALL GOOD on the disk.!

    3- This could be an "empiric method" (with some high risks naturally)... when

    no hope (after backup eventually).

    Thanks

    knp

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    BIS and TER REPAETITA...!

    Problem almost solved...?

    1- Knop7.2 was concerned in place of 7.4.2. But this is not essential.

    Always I boot from iso file.

    2- FileSystem concerned (and corrected also by GParted):

    2a- NTfs..PRESENT. Ah! NTfs...not recommended for current usage b

    but occasionnally only. Despite I avoid WRITING.

    This is well known

    "CHKDSK / f" recommended as always (twice).

    Before GParted if possible.

    2b- "A 2nd ReiserFS Partition" for knoppix installed on an USB_HDD.

    This makes folders rigths access too strong when saving files.

    To avoid such my problems it is worthwhile:

    ---2b1 to save files AND change ALL Rights to the LEAST way...Or

    ---2b2 to save files first on the associated "Fat Knoppix.img" which

    allows AUTOMATICALLY the least RIGTHS. This avoid forgetting

    in 2b1).

    Naturally these methods break some security problem.

    But Mr K.KNOPPER doing this automatically on the "knoppix.img" (boot-iso)

    I may suppose it is not a great danger....Perhaps Viruses?

    Thanks for all eventual remarks and advertisings

    knp
    Last edited by knp; 03-06-2017 at 07:56 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray picture

HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray

$179.00



HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM

$1419.00



HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K picture

HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K

$299.00



DELL PEM640 POWEREDGE M640 BLADE SERVER picture

DELL PEM640 POWEREDGE M640 BLADE SERVER

$539.95



HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives picture

HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives

$59.98



Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD picture

Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD

$1000.00



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



Dell PowerEdge M620 Blade Server picture

Dell PowerEdge M620 Blade Server

$39.99



DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 32GB H330 2x10Gb X520 picture

DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 32GB H330 2x10Gb X520

$200.00