Results 1 to 2 of 2

Thread: Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!

  1. #1
    Senior Member
    Join Date
    Jan 2012
    Posts
    110

    Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!

    Knop_7.4.2 Folders or Partitions becoming Read_Only by themselves

    Hi

    Does someone explains why and how some folders or partitions occur

    to become "Read_Only" BY THEMSELVES ?

    1- Once this happened after a libreOffice error.

    I had to save all documents and initialize the partition (ReiserFS).

    2- Recently one folder (only one I remarked!) became "Read_Only".

    Impossible to make it "Writable" again BY ANY MEANS!

    So I tried, using GParted,to "shorten one ReiserPartition" and "enlarge"

    another one ReiserPartition.

    These operations took so much time that I had to interrupt them.

    Intrigated by this strange behaviour I looked again integrity of the disk.

    Surprisingly "The bad Folder had gone out" leaving ALL GOOD on the disk.!

    3- This could be an "empiric method" (with some high risks naturally)... when

    no hope (after backup eventually).

    Thanks

    knp

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    BIS and TER REPAETITA...!

    Problem almost solved...?

    1- Knop7.2 was concerned in place of 7.4.2. But this is not essential.

    Always I boot from iso file.

    2- FileSystem concerned (and corrected also by GParted):

    2a- NTfs..PRESENT. Ah! NTfs...not recommended for current usage b

    but occasionnally only. Despite I avoid WRITING.

    This is well known

    "CHKDSK / f" recommended as always (twice).

    Before GParted if possible.

    2b- "A 2nd ReiserFS Partition" for knoppix installed on an USB_HDD.

    This makes folders rigths access too strong when saving files.

    To avoid such my problems it is worthwhile:

    ---2b1 to save files AND change ALL Rights to the LEAST way...Or

    ---2b2 to save files first on the associated "Fat Knoppix.img" which

    allows AUTOMATICALLY the least RIGTHS. This avoid forgetting

    in 2b1).

    Naturally these methods break some security problem.

    But Mr K.KNOPPER doing this automatically on the "knoppix.img" (boot-iso)

    I may suppose it is not a great danger....Perhaps Viruses?

    Thanks for all eventual remarks and advertisings

    knp
    Last edited by knp; 03-06-2017 at 07:56 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco SG95D 5 port Gigabit Desktop Switch SG95D-05-IN picture

Cisco SG95D 5 port Gigabit Desktop Switch SG95D-05-IN

$35.00



Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



Cisco MS120-48FP - 52 Ports Fully Managed Ethernet Switch UNCLAIMED picture

Cisco MS120-48FP - 52 Ports Fully Managed Ethernet Switch UNCLAIMED

$449.00



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$18.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX picture

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX

$18.99



*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC* picture

*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC*

$29.99



Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture

Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED

$89.97



YuanLey 10 Port Gigabit PoE Switch With 8 Poe Unmanaged with 2 1000Mbps Uplink picture

YuanLey 10 Port Gigabit PoE Switch With 8 Poe Unmanaged with 2 1000Mbps Uplink

$20.00