Results 1 to 2 of 2

Thread: Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!

  1. #1
    Senior Member
    Join Date
    Jan 2012
    Posts
    110

    Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!

    Knop_7.4.2 Folders or Partitions becoming Read_Only by themselves

    Hi

    Does someone explains why and how some folders or partitions occur

    to become "Read_Only" BY THEMSELVES ?

    1- Once this happened after a libreOffice error.

    I had to save all documents and initialize the partition (ReiserFS).

    2- Recently one folder (only one I remarked!) became "Read_Only".

    Impossible to make it "Writable" again BY ANY MEANS!

    So I tried, using GParted,to "shorten one ReiserPartition" and "enlarge"

    another one ReiserPartition.

    These operations took so much time that I had to interrupt them.

    Intrigated by this strange behaviour I looked again integrity of the disk.

    Surprisingly "The bad Folder had gone out" leaving ALL GOOD on the disk.!

    3- This could be an "empiric method" (with some high risks naturally)... when

    no hope (after backup eventually).

    Thanks

    knp

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    BIS and TER REPAETITA...!

    Problem almost solved...?

    1- Knop7.2 was concerned in place of 7.4.2. But this is not essential.

    Always I boot from iso file.

    2- FileSystem concerned (and corrected also by GParted):

    2a- NTfs..PRESENT. Ah! NTfs...not recommended for current usage b

    but occasionnally only. Despite I avoid WRITING.

    This is well known

    "CHKDSK / f" recommended as always (twice).

    Before GParted if possible.

    2b- "A 2nd ReiserFS Partition" for knoppix installed on an USB_HDD.

    This makes folders rigths access too strong when saving files.

    To avoid such my problems it is worthwhile:

    ---2b1 to save files AND change ALL Rights to the LEAST way...Or

    ---2b2 to save files first on the associated "Fat Knoppix.img" which

    allows AUTOMATICALLY the least RIGTHS. This avoid forgetting

    in 2b1).

    Naturally these methods break some security problem.

    But Mr K.KNOPPER doing this automatically on the "knoppix.img" (boot-iso)

    I may suppose it is not a great danger....Perhaps Viruses?

    Thanks for all eventual remarks and advertisings

    knp
    Last edited by knp; 03-06-2017 at 07:56 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper SRX-MP-1SFP-GE SFP Mini-GBIC Layer 3 Transceiver Module 1 Year Warranty picture

Juniper SRX-MP-1SFP-GE SFP Mini-GBIC Layer 3 Transceiver Module 1 Year Warranty

$110.00



Cisco C3KX-SM-10G 10GbE SFP+ Service Module for Cisco 3560-X and 3750-X picture

Cisco C3KX-SM-10G 10GbE SFP+ Service Module for Cisco 3560-X and 3750-X

$52.00



Juniper QFX5120-32C-AFO 32x100GbE Switch with 2x AC Airflow-Lifetime Warranty picture

Juniper QFX5120-32C-AFO 32x100GbE Switch with 2x AC Airflow-Lifetime Warranty

$3450.00



Finisar FTLX1471D3BCL SFP+ 10GB LR 10KM 1310nm Optical Transceiver picture

Finisar FTLX1471D3BCL SFP+ 10GB LR 10KM 1310nm Optical Transceiver

$14.00



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver picture

Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver

$9.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$46.16



For Ubiquiti UF-MM-10G Transceiver 10G SFP 10GBase-SR Multimode LC 300 Meters picture

For Ubiquiti UF-MM-10G Transceiver 10G SFP 10GBase-SR Multimode LC 300 Meters

$9.49



Cisco SFP-10G-ER 10GBASE-ER SFP+ Transceiver Module GBIC picture

Cisco SFP-10G-ER 10GBASE-ER SFP+ Transceiver Module GBIC

$134.99



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$99.00