This may help:
http://www.boot-disk.com/boot_priority.htm
I'm using KNOPPIX_V7.7.1DVD-2016-10-22-EN.
I boot using the DVD and run Install KNOPPIX to flash disk.
When I try to boot from the USB all I get is a blinking cursor...
I have a Active@Boot USB that works in the computer I'm using.
I do notice that my boot menu shows the Knoppix USB as 'USB-ZIP0 : SanDisk' under the 'Removable' section of the menu.
When I boot from my Active@Boot USB the boot menu show it as 'USB-HHD0 : USB DISK' under the 'Hard Disk' section of the menu.
Any help would be appreciated... where do I start to make this work
This may help:
http://www.boot-disk.com/boot_priority.htm
Thanks for the reply... I did check all the BIOS settings but, after using the same USB on some other computers, it seems to be something unique to the way some BIOS's treat the device descriptor.
I'm puzzled why one machine will see it as USB-ZIP0 and others as USB-HHD0. I'm going to look at the disk type byte(s) and see what (if any) difference there is between the boot-able USB created by Active@Boot and the one created by flash-knoppix. Can anyone point me to where the disk type byte(s) may (or what they should) be?
Another thing I'm going to do is create the USB on a machine that does see it as USB-HDD0...
Vintage Apple Newton MessagePad 2000 With Original Box and Some Accessories
$199.99
Vintage Apple M2980 AppleDesign Keyboard - Tested and working - Good condition
$19.75
Apple Macintosh Performa 466 Vintage Computer | SKU 146754
$149.95
Vintage Apple Lisa Brochure, very nice condition
$50.00
Vintage A3S2 Apple III Computer With 12 Volt Motherboard 820-0043-00
$450.00
Vintage Apple Computer Monitor
$45.90
Rare Vintage Miniscribe Apple Macintosh SE / 20 8425SA Head Motor & Guide
$24.99
Vintage Apple Macintosh Performa 550
$360.00
Apple Macintosh PowerBook 180 Vintage Laptop | Retro Computer
$149.95
Vintage Apple Macintosh PowerBook G3 M4753 w/ Power Adapter
$149.00