Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ATARI 410 Program Recorder works but Needs servicing w/book picture

ATARI 410 Program Recorder works but Needs servicing w/book

$55.00



Atari 800XL Computer - RAM Upgraded to 576K - Mechanical AWC Keyboard - + BONUS picture

Atari 800XL Computer - RAM Upgraded to 576K - Mechanical AWC Keyboard - + BONUS

$200.00



ATARI 1050 Dual Density Disk Drive for 800 800XL XL XE  picture

ATARI 1050 Dual Density Disk Drive for 800 800XL XL XE

$200.00



Atari Jaguar COMPOSITE MONITOR Audio/Video(AV) Cable NEW Compatible picture

Atari Jaguar COMPOSITE MONITOR Audio/Video(AV) Cable NEW Compatible

$26.95



Atari 400 48k Memory Upgrade picture

Atari 400 48k Memory Upgrade

$34.95



Atari 130xe computer w/power,2600  joysticks, hook up  Original box Works tested picture

Atari 130xe computer w/power,2600 joysticks, hook up Original box Works tested

$329.99



Atari OSS 4-1 Basic XL Basic XE MAC/65 ACTION   Choose your color picture

Atari OSS 4-1 Basic XL Basic XE MAC/65 ACTION Choose your color

$39.99



Atari Falcon 030 Computer Upgrade 14 MB Ram picture

Atari Falcon 030 Computer Upgrade 14 MB Ram

$1950.00



Atari MEGA ST/E - WORKING -Mouse Keyboard & Manual - 16MHz - 4MB RAM - 324MB HDD picture

Atari MEGA ST/E - WORKING -Mouse Keyboard & Manual - 16MHz - 4MB RAM - 324MB HDD

$1312.23



SWITCH Joystick Advanced GRAVIS / Amiga / Commodore/ Atari - Controller Only picture

SWITCH Joystick Advanced GRAVIS / Amiga / Commodore/ Atari - Controller Only

$63.99