-
Senior Member
registered user
Poor Man's Install to Hard Disk since Knoppix 7.6.0
I always run Knoppix as a 'Poor man's Install' on my hard drive. I use Grub4DOS to boot my multi OS system and the stanza that boots my Knoppix is something like:
title Knoppix 7.7 DVD
# MUST add the mkimage cheat code to create a persistent image file. The cheatcode can be removed once the file is created.
# Use preferences-desktop inside Knoppix to reset background wallpaper from none to supplied background.jpg.
kernel (hd0,4)/FrugalLinux/knoppix-770/linux knoppix nomce fromhd=/dev/sdb5 knoppix_dir=/FrugalLinux/knoppix-770 knoppix_name=KNOPPIX lang=uk libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime apm=power-off
initrd (hd0,4)/FrugalLinux/knoppix-770/minirt.gz
boot
Now, this has worked for many years but since the release of 7.6.0 I have had a problem.
Things proceed OK and then the following message flashes continuously:
Waiting (USB) Knoppix 7.7 in: /dev/sb5
After a while I get the message:
Could not mount disk to /mnt-system. Starting debugging Shell
and you are dumped at the command prompt.
I initially thought that this was a bug in 7.6 but it also happens with 7.7.
Based on the initial message displayed I wondered if a Poor Man's Installed Knoppix would now only boot from USB connected devices. I decided to replace the minirt.gz file from 7.7 with that from 7.5 and it boots! This is a good temporary solution but since the minrt.gz of 7.7 may have other useful improvements I would prefer to solve the problem properly.
I am a little surprised no one else has reported this problem - Capricorny, for example, boots this way I think?
Has anyone else had this problem?
Does anybody have a proper solution, which may involve the modification of the files within minirt.gz I guess?
-
640/5000
Here is the procedure I followed
Formatting a partition in fat,
Copy on this dvd partitition via flash install
Starting with the DVD by doing fromhd = / dev / (fat partition)
Copy of the boot directory in mnt-system,
Chmod + x / boot / *
Back to my boot partition: debian strech
Editing my /etc/grub.d/40_custom file
Menuentry 'knoppix' {
Insmod part_msdos
Insmod fat
Insmod chain
Set root = 'hd1, msdos1'
Search -no-floppy -fs-uuid -set = root (uuid number of my partition)
Linux / boot / vmlinuz root = / dev / sdb1
Initrd /boot/ninirt.gz
Boot desktop = gnome
}
It works very well and the startup is very very fast
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Factory new Sealed SRX-GP-16GE-PoE Juniper Networks expansion module
$79.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.07
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED
$299.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00