Results 1 to 10 of 10

Thread: Mounting self-made cloop file - how?

  1. #1
    Member registered user
    Join Date
    Sep 2005
    Posts
    36

    Mounting self-made cloop file - how?

    I create a cloop file using the following commands:\n XXX\nYYY I

    root@Microknoppix:/media/sdc2# ddrescue /dev/sda1 /media/sdc2/sda1_2017-03-04.img ... root@Microknoppix:/media/sdc2# create_compressed_fs -L -1 sda1_2017-03-04.img /media/sdc2/sda1_2017-03-04.cloop ... root@Microknoppix:/media/sdc2# ls -l sda1_2017-03-04.* -rwxrwxrwx 1 knoppix knoppix 266178504 Mär 4 21:35 sda1_2017-03-04.cloop -rwxrwxrwx 1 knoppix knoppix 314572800 Mär 4 21:31 sda1_2017-03-04.img Looks OK. Now I can mount the uncompressed image: root@Microknoppix:/media/sdc2# mkdir /media/img-test /media/cloop-test root@Microknoppix:/media/sdc2# mount -r -o,loop -t ntfs /media/sdc2/sda1_2017-03-01.img /media/img-test/ root@Microknoppix:/media/sdc2# df | grep test /dev/loop0 307196 233384 73812 76% /media/img-test OK. Then I wanted to mount the cloop file... The file itself contains the following lines of script: #!/bin/sh #V2.0 Format modprobe cloop file=$0 && mount -r -t iso9660 /dev/cloop $1 exit $? So I tried: root@Microknoppix:/media/sdc2# modprobe -v cloop file=/media/sdc2/sda1_2017-03-04.cloop which outputs nothing. Did it work so far? No idea. Trying anyway: root@Microknoppix:/media/sdc2# mount -r -t ntfs /dev/cloop /media/cloop-test NTFS signature is missing. Failed to mount '/dev/cloop0': Das Argument ist ungültig The device '/dev/cloop0' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? hmmm... root@Microknoppix:/media/sdc2# mount | grep cloop /dev/cloop0 on /KNOPPIX type iso9660 (ro,relatime) /dev/cloop1 on /KNOPPIX1 type iso9660 (ro,relatime) So /dev/cloop0 and /dev/cloop1 are in use (telling me that KNOPPIX itself managed to mount its files just fine. Trying /dev/cloop2 instead: root@Microknoppix:/media/sdc2# mount -r -t ntfs /dev/cloop2 /media/cloop-test Failed to read bootsector (size=0) Failed to mount '/dev/cloop2': Das Argument ist ungültig The device '/dev/cloop2' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? This might suggest that the modprobe command silently failed. Trying the losetup method, mentioned in /usr/share/doc/cloop-utils/README: root@Microknoppix:/media/sdc2# losetup /dev/cloop3 /media/sdc2/sda1_2017-03-04.cloop losetup: /dev/cloop3: Loop-Gerät konnte nicht eingerichtet werden: Das Dateisystem ist nur lesbar (Translation: Loop device could not get created. The filesystem is readonly.) Hmmm... root@Microknoppix:/media/sdc2# ls -l /dev/cloop* lrwxrwxrwx 1 root root 6 Mär 4 20:38 /dev/cloop -> cloop0 brw-rw---- 1 root disk 240, 0 Mär 4 20:38 /dev/cloop0 brw-rw---- 1 root disk 240, 1 Mär 4 20:38 /dev/cloop1 brw-rw---- 1 root disk 240, 2 Mär 4 20:38 /dev/cloop2 brw-rw---- 1 root disk 240, 3 Mär 4 20:38 /dev/cloop3 brw-rw---- 1 root disk 240, 4 Mär 4 20:38 /dev/cloop4 brw-rw---- 1 root disk 240, 5 Mär 4 20:38 /dev/cloop5 brw-rw---- 1 root disk 240, 6 Mär 4 20:38 /dev/cloop6 brw-rw---- 1 root disk 240, 7 Mär 4 20:38 /dev/cloop7 root@Microknoppix:/media/sdc2# rm -f /dev/cloop6 root@Microknoppix:/media/sdc2# ll /dev/cloop* lrwxrwxrwx 1 root root 6 Mär 4 20:38 /dev/cloop -> cloop0 brw-rw---- 1 root disk 240, 0 Mär 4 20:38 /dev/cloop0 brw-rw---- 1 root disk 240, 1 Mär 4 20:38 /dev/cloop1 brw-rw---- 1 root disk 240, 2 Mär 4 20:38 /dev/cloop2 brw-rw---- 1 root disk 240, 3 Mär 4 20:38 /dev/cloop3 brw-rw---- 1 root disk 240, 4 Mär 4 20:38 /dev/cloop4 brw-rw---- 1 root disk 240, 5 Mär 4 20:38 /dev/cloop5 root@Microknoppix:/media/sdc2# losetup /dev/cloop6 /media/sdc2/sda1_2017-03-04.cloop losetup: /dev/cloop6: Loop-Gerät konnte nicht eingerichtet werden: Datei oder Verzeichnis nicht gefunden (Translation: Loop device could not get created. File or directory not found.) root@Microknoppix:/media/sdc2# losetup -f /dev/loop0 Why /dev/loop0, that one should be in use! How can I do this? What am I overlooking? It it impossible to do with a poor-man's-installation of Knoppix? Has anyone managed to do this using Knoppix 7.7.1? Please help!
    Last edited by DirkS; 03-04-2017 at 10:53 PM. Reason: Formatting is totally f'ed up.

  2. #2
    Member registered user
    Join Date
    Sep 2005
    Posts
    36
    WTF. Again:

    I create a cloop file using the following commands:

    root@Microknoppix:/media/sdc2# ddrescue /dev/sda1 /media/sdc2/sda1_2017-03-04.img
    ...
    root@Microknoppix:/media/sdc2# create_compressed_fs -L -1 sda1_2017-03-04.img /media/sdc2/sda1_2017-03-04.cloop
    ...
    root@Microknoppix:/media/sdc2# ls -l sda1_2017-03-04.*
    -rwxrwxrwx 1 knoppix knoppix 266178504 Mär 4 21:35 sda1_2017-03-04.cloop
    -rwxrwxrwx 1 knoppix knoppix 314572800 Mär 4 21:31 sda1_2017-03-04.img

    Looks OK. Trying to mount the uncompressed image:

    root@Microknoppix:/media/sdc2# mkdir /media/img-test /media/cloop-test
    root@Microknoppix:/media/sdc2# mount -r -o,loop -t ntfs /media/sdc2/sda1_2017-03-01.img /media/img-test/
    root@Microknoppix:/media/sdc2# df | grep test /dev/loop0 307196 233384 73812 76% /media/img-test

    OK. Then I wanted to mount the cloop file... The file itself contains the following lines of script:
    #!/bin/sh
    #V2.0 Format
    modprobe cloop file=$0 && mount -r -t iso9660 /dev/cloop $1
    exit $?

    So I tried:

    root@Microknoppix:/media/sdc2# modprobe -v cloop file=/media/sdc2/sda1_2017-03-04.cloop

    which outputs nothing. Did it work so far? No idea. Trying anyway:

    root@Microknoppix:/media/sdc2# mount -r -t ntfs /dev/cloop /media/cloop-test
    NTFS signature is missing. Failed to mount '/dev/cloop0': Das Argument ist ungültig
    The device '/dev/cloop0' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

    hmmm...

    root@Microknoppix:/media/sdc2# mount | grep cloop
    /dev/cloop0 on /KNOPPIX type iso9660 (ro,relatime)
    /dev/cloop1 on /KNOPPIX1 type iso9660 (ro,relatime)

    So /dev/cloop0 and /dev/cloop1 are in use (telling me that Knoppix itself managed to mount its files just fine. Trying /dev/cloop2 instead:

    root@Microknoppix:/media/sdc2# mount -r -t ntfs /dev/cloop2 /media/cloop-test
    Failed to read bootsector (size=0)
    Failed to mount '/dev/cloop2': Das Argument ist ungültig
    The device '/dev/cloop2' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

    This might suggest that the modprobe command silently failed. Trying the losetup method, mentioned in /usr/share/doc/cloop-utils/README:

    root@Microknoppix:/media/sdc2# losetup /dev/cloop3 /media/sdc2/sda1_2017-03-04.cloop
    losetup: /dev/cloop3: Loop-Gerät konnte nicht eingerichtet werden: Das Dateisystem ist nur lesbar (Translation: Loop device could not get created. The filesystem is readonly.)

    Hmmm...

    root@Microknoppix:/media/sdc2# ls -l /dev/cloop*
    lrwxrwxrwx 1 root root 6 Mär 4 20:38 /dev/cloop -> cloop0
    brw-rw---- 1 root disk 240, 0 Mär 4 20:38 /dev/cloop0
    brw-rw---- 1 root disk 240, 1 Mär 4 20:38 /dev/cloop1
    brw-rw---- 1 root disk 240, 2 Mär 4 20:38 /dev/cloop2
    brw-rw---- 1 root disk 240, 3 Mär 4 20:38 /dev/cloop3
    brw-rw---- 1 root disk 240, 4 Mär 4 20:38 /dev/cloop4
    brw-rw---- 1 root disk 240, 5 Mär 4 20:38 /dev/cloop5
    brw-rw---- 1 root disk 240, 6 Mär 4 20:38 /dev/cloop6
    brw-rw---- 1 root disk 240, 7 Mär 4 20:38 /dev/cloop7
    root@Microknoppix:/media/sdc2# rm -f /dev/cloop6 /dev/cloop7
    root@Microknoppix:/media/sdc2# ll /dev/cloop*
    lrwxrwxrwx 1 root root 6 Mär 4 20:38 /dev/cloop -> cloop0
    brw-rw---- 1 root disk 240, 0 Mär 4 20:38 /dev/cloop0
    brw-rw---- 1 root disk 240, 1 Mär 4 20:38 /dev/cloop1
    brw-rw---- 1 root disk 240, 2 Mär 4 20:38 /dev/cloop2
    brw-rw---- 1 root disk 240, 3 Mär 4 20:38 /dev/cloop3
    brw-rw---- 1 root disk 240, 4 Mär 4 20:38 /dev/cloop4
    brw-rw---- 1 root disk 240, 5 Mär 4 20:38 /dev/cloop5
    root@Microknoppix:/media/sdc2#

    They are gone. Doesn't look readonly to me. Anyway:

    root@Microknoppix:/media/sdc2# losetup /dev/cloop6 /media/sdc2/sda1_2017-03-04.cloop
    losetup: /dev/cloop6: Loop-Gerät konnte nicht eingerichtet werden: Datei oder Verzeichnis nicht gefunden (Translation: Loop device could not get created. File or directory not found.)

    root@Microknoppix:/media/sdc2# losetup -f
    /dev/loop0

    Why /dev/loop0, that one should be in use!

    How can I do this? What am I overlooking?
    It it impossible to do with a poor-man's-installation of Knoppix?
    Has anyone managed to do this using Knoppix 7.7.1?
    Please help!

  3. #3
    Member registered user
    Join Date
    Sep 2005
    Posts
    36
    Meanwhile I found a way to mount a cloop-image that works under Knoppix 7.0 but not under 7.7.1, so now I suspect that something is broken in 7.7.1.

  4. #4
    Member registered user
    Join Date
    Dec 2006
    Posts
    44
    I make a cloop file directly from the mounted file system like this:
    Code:
    $ genisoimage -input-charset ISO-8859-15 -R -l -D -V KNOPPIX_FS -quiet \
      -no-split-symlink-components -no-split-symlink-fields \
      -hide-rr-moved -cache-inodes /path/to/cloop/filesystem/root/directory \
      | create_compressed_fs -q -B 65536 -t 8 -L 9 \
      -f /tmp/isotemp - /path/to/created/cloop/file
    I don't know if your creation method with ddrescue and create_compressed_fs does the same.
    Does the method below work for you?
    Code:
    $ sudo losetup --verbose --read-only  /dev/cloop7 /mnt-system/KNOPPIX/KNOPPIX1
    losetup: /mnt-system/KNOPPIX/KNOPPIX1: Warning: file does not fit into a 512-byte sector; the end of the file will be ignored.
    
    $ sudo mount --verbose  /dev/cloop7  /mnt-user
    mount: /dev/cloop7 is write-protected, mounting read-only
    mount: /dev/cloop7 mounted on /mnt-user.
    
    $ sudo blkid | grep cloop7
    /dev/cloop7: UUID="2016-10-22-16-00-20-00" LABEL="KNOPPIX_ADDONS1" TYPE="iso9660"
    
    $ df | grep cloop7
    /dev/cloop7      1033766   1033766         0 100% /mnt-user
    Since Knoppix 7 I cannot find a way to detach the cloop device again, so I have to reboot to release the device.
    Code:
    $ sudo umount --verbose  /dev/cloop7
    umount: /mnt-user (/dev/cloop7) unmounted
    
    $ sudo losetup --verbose --detach  /dev/cloop7
    losetup: /dev/cloop7: failed to use device: No such device
    
    $ sudo blkid | grep cloop7
    /dev/cloop7: UUID="2016-10-22-16-00-20-00" LABEL="KNOPPIX_ADDONS1" TYPE="iso9660"
    Last edited by fredvej; 03-05-2017 at 11:33 AM.

  5. #5
    Member registered user
    Join Date
    Dec 2006
    Posts
    44
    The file system in the cloop file cannot be changed and must be attached as read-only
    Code:
     sudo losetup --verbose --read-only  /dev/cloop7 /media/sdc2/sda1_2017-03-04.cloop

  6. #6
    Member registered user
    Join Date
    Sep 2005
    Posts
    36
    Just quick: Thank you very much! I'll try these later, some hours later if I can, otherwise tomorrow or next weekend.

    The method I tried (twice) on Knoppix 7.0 was, after becoming root:
    Code:
    # mkdir /media/test-cloop
    # mount /media/sdc2/sda1_2017-03-04.cloop /media/test-cloop -o loop=/dev/cloop3,ro
    I didn't even need to specify the filesystem type.

    Also thanks for the confirmation that something is off in 7.7.1. I want to find out where the ability to mount cloop-files on an already running Knoppix (instead of during booting) got lost and I'm on the hunt for older Knoppix versions between 7.0 and 7.7.1. Meanwhile I found some on Sourceforge. Preparations and tests will take some time... As soon as I discover something, I report here.

  7. #7
    Member registered user
    Join Date
    Sep 2005
    Posts
    36
    I'm at it.

    Quote Originally Posted by DirkS View Post
    The method I tried (twice) on Knoppix 7.0 was, after becoming root:
    Code:
    # mkdir /media/test-cloop
    # mount /media/sdc2/sda1_2017-03-04.cloop /media/test-cloop -o loop=/dev/cloop3,ro
    I didn't even need to specify the filesystem type.
    This method also works in 7.3 but fails in 7.4.2, 7.7.0 and 7.7.1
    For the following tests I used /media/sr0 as mountpoint instead of creating a directory named /media/test-cloop.
    Using the commands that are contained in the cloop file at the beginning, slightly modified:
    Code:
    #modprobe cloop file=/media/sdd2/sda1_2017-03-01.cloop; echo $?
    # mount -r -t auto /dev/cloop3 /media/sr0
    This works in 7.4.2, even though it took me several tries to find the correct number after /dev/cloop. But this method does not work in 7.7.0 and 7.7.1:
    Code:
    root@Microknoppix:/media/sdd2# mount -r -t auto /dev/cloop3 /media/sr0
    mount: /dev/cloop3: Superblock konnte nicht gelesen werden (Translation: Superblock could not get read)
    Also failed with all other cloop devices.

    Your method:
    Code:
    root@Microknoppix:/media/sdd2# losetup --verbose --read-only /dev/cloop6 /media/sdd2/sda1_2017-03-04.cloop
    root@Microknoppix:/media/sdd2# mount --verbose  /dev/cloop6 /media/sr0
    works in 7.7.0. Yay! I have to reboot to test it in 7.7.1 and/or older versions, but I wanted to write this post with the results so far first.

    By the way, while still being root I was able to do
    Code:
    root@Microknoppix:/media/sde2# df | grep sr0; echo $?
    /dev/cloop6        307196     233384      73812   76% /media/sr0
    0
    root@Microknoppix:/media/sdd2# umount /dev/sr0
    root@Microknoppix:/media/sdd2#  df | grep sr0; echo $?
    1
    so umounting as root works for me. But I cannot free/detach /dec/cloop6:
    Code:
    root@Microknoppix:/media/sdd2#  losetup --verbose -d /dev/cloop6
    losetup: /dev/cloop6: Benutzung des Gerätes ist fehlgeschlagen: Erfolg (Translation: Using the device failed: Success - sorry, that's what it says.)
    So indeed, at this point a reboot is required.
    Last edited by DirkS; 03-12-2017 at 10:21 PM. Reason: added some info.

  8. #8
    Member registered user
    Join Date
    Sep 2005
    Posts
    36
    Wrapping up.

    Code:
    root@Microknoppix:/media/sdd2# losetup --verbose --read-only /dev/cloop6 /media/sdd2/sda1_2017-03-04.cloop
    root@Microknoppix:/media/sdd2# mount --verbose  /dev/cloop6 /media/sr0
    also works in 7.7.1. Double Yay! So I have a solution for the newest Knoppix. Now I hope that it will still work in the upcoming Knoppix 8.

    Is there a way to declare the thread as "solved"?

  9. #9
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by DirkS View Post
    Is there a way to declare the thread as "solved"?
    I suggest you PM Werner P. Schulz to see if this is possible.

  10. #10
    Member registered user
    Join Date
    Sep 2005
    Posts
    36
    Thanks, utu, I haven't done this yet, but I'm considering it.

    Meanwhile I'm going through the mailing list and found something:

    https://lists.debian.org/debian-knop.../msg00000.html - title: "losetup from 7.6.1 can't detach a cloop device" - sounds familiar, isn't it? Seems like this is caused by a change in losetup. Klaus Knopper posted an answer in which he mentioned that he filed a bug report and using the losetup of busybox should work. I can't test that right now, just leaving the info here so it will not get forgotten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's

$299.00



HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED picture

HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED

$179.99



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED picture

HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED

$550.00



HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD picture

HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD

$750.00



HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs picture

HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs

$399.00



HP ProLiant Microserver Micro Server HSTNS-5151 untested picture

HP ProLiant Microserver Micro Server HSTNS-5151 untested

$75.00



ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM picture

ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM

$170.00



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001 picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001

$849.99



HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FASTâš¡ï¸âœ… picture

HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FASTâš¡ï¸âœ…

$79.99