Results 1 to 2 of 2

Thread: lots of errors after connecting to the Internet, suspending box ...

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    lots of errors after connecting to the Internet, suspending box ...

    I am running knoppix 7.7.1:


    $ uname -a
    Linux Microknoppix 4.7.9-64 #19 SMP PREEMPT Sat Oct 22 02:39:01 CEST 2016 x86_64 GNU/Linux


    on a laptop on which Windows 7 was installed. I decided to keep that baseline installation. So, I used gparted to create a partition, then went tohd ... At times I also run knoppix off the DVD.


    Everything worked just fine. All of a sudden, right after I physically connect the network cable to the router, the laptop, its USB modem and/or USB keyboard become unresponsive for a few seconds and then start to temporarily freeze. I see all kinds of errors as if there is something wrong, but (after restarting and while disconnected to the Internet) neither memtest, nor testcd, nor the BIOS and its internal harddrive and many other tests report any kinds of errors. Those problems happen more often after suspending the box for a while. Also, when I boot Windows 7 all is fine.

    I only connect to the Internet when I need to (using ifconfing ... [up|down]).


    What would you suggest?



    Code:
    $ _FLR="error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not "
    
    
    $ echo "${_FLR}"
    error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not 
    
    
    $ dmesg | grep -i "${_FLR}"
    [   22.483081] systemd-udevd[2216]: Invalid rule /UNIONFS/lib/udev/rules.d/60-persistent-input.rules:6: unknown key '*ENV{ID_BUS}'
    [   24.201434] systemd-udevd[2227]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.096064] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [   26.684757] systemd-udevd[2229]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.713380] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   27.046437] systemd-udevd[2220]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   29.921399] systemd-udevd[2229]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   33.288572] systemd-udevd[2299]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   38.947027] usb 1-1.1: clear tt 1 (0060) error -71
    [   38.952651] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.956942] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.961148] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.965399] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969617] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969619] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.973854] usb 1-1.1-port4: cannot disable (err = -71)
    [   38.978117] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.982369] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.986619] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.990871] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995120] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995122] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.999405] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.003642] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.007885] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.012180] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.016568] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020794] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020798] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.025167] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.029421] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.033619] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.038041] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.042301] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046507] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046511] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.050780] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.055008] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.059273] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [   39.836575] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.844668] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.848670] usb 1-1.1.3: device descriptor read/all, error -71
    [   57.788016] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [   59.835892] systemd-udevd[2492]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 29' failed with exit code 99.
    [   88.200831] systemd-logind[2701]: Failed to start user service, ignoring: Unknown unit: user@1000.service
    [  114.846318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  211.636742] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  211.642890] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [  478.890873] sd 8:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 5493.612478] usb 1-1.1: clear tt 1 (00e0) error -71
    [ 5493.616729] usb 1-1.1: clear tt 1 (00d0) error -71
    [ 5493.621000] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.625265] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.629473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.633748] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.637997] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.638001] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.642224] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.646459] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.650767] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.655019] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.659255] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663477] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.667713] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.672004] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.676241] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.680506] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.684689] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688979] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688983] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.693259] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.697490] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.701750] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.706013] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.710270] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714471] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714475] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [13849.615013] CPU: 2 PID: 2739 Comm: Xorg Not tainted 4.7.9-64 #19
    [25224.149345] usb 1-1.1: clear tt 1 (0120) error -71
    [25224.155933] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.160182] usb 1-1.1: clear tt 1 (0110) error -71
    [25224.164461] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.168652] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.172908] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177163] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177172] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.181453] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.185686] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.189956] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.194190] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.198409] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202676] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202680] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.206907] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.211173] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.215459] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.219682] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.223921] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228206] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228211] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.232449] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.236796] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.241056] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.245299] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.249543] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253781] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253786] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.258085] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.262328] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.266553] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.270798] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [25224.275074] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.279330] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.283593] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287817] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287821] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25224.292197] usb 1-1.1-port3: cannot disable (err = -71)
    [25224.296292] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.300577] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.304819] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.309051] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.815311] usb 1-1.1: clear tt 1 (0160) error -71
    [25225.819570] usb 1-1.1: clear tt 1 (0170) error -71
    [25225.823830] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.828103] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.832330] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.836574] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840824] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840828] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25225.845079] usb 1-1.1-port3: cannot disable (err = -71)
    [25226.631992] usb 1-1.1: device not accepting address 24, error -71
    $

  2. #2
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    I meant to say USB mouse, not "USB modem"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD picture

HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD

$299.00



Dell PowerEdge R330 Xeon E3-1220 v5 3.0GHz  32gb  H330  2x 3.5

Dell PowerEdge R330 Xeon E3-1220 v5 3.0GHz 32gb H330 2x 3.5" Trays SVR 2012

$189.99



Dell PowerEdge R430 1U Server 2x E5-2690 v3 2.6ghz 24Cores 64gb 4Trays H730 2PSU picture

Dell PowerEdge R430 1U Server 2x E5-2690 v3 2.6ghz 24Cores 64gb 4Trays H730 2PSU

$279.99



Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT picture

Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT

$490.00



Dell PowerEdge R720 Dual Intel Xeon E5-2643 @3.30GHz 128GB RAM No HDD H710P picture

Dell PowerEdge R720 Dual Intel Xeon E5-2643 @3.30GHz 128GB RAM No HDD H710P

$124.50



Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G picture

Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G

$240.00



HP ProLiant DL360 G9 Server 2x Xeon E5-2690 V3 24 Cores P440ar 128GB DDR4 1x SSD picture

HP ProLiant DL360 G9 Server 2x Xeon E5-2690 V3 24 Cores P440ar 128GB DDR4 1x SSD

$279.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$289.99



HP ProLiant DL360 Gen9 Server 2x E5-2620v4 2.1GHz =16 Cores 32GB P440AR 4xRJ45 picture

HP ProLiant DL360 Gen9 Server 2x E5-2620v4 2.1GHz =16 Cores 32GB P440AR 4xRJ45

$220.00



Dell PowerEdge R430 Server 2x E5-2680 V4 = 28 Cores H730 64GB RAM 2x 3TB SAS picture

Dell PowerEdge R430 Server 2x E5-2680 V4 = 28 Cores H730 64GB RAM 2x 3TB SAS

$372.99