Results 1 to 2 of 2

Thread: lots of errors after connecting to the Internet, suspending box ...

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    lots of errors after connecting to the Internet, suspending box ...

    I am running knoppix 7.7.1:


    $ uname -a
    Linux Microknoppix 4.7.9-64 #19 SMP PREEMPT Sat Oct 22 02:39:01 CEST 2016 x86_64 GNU/Linux


    on a laptop on which Windows 7 was installed. I decided to keep that baseline installation. So, I used gparted to create a partition, then went tohd ... At times I also run knoppix off the DVD.


    Everything worked just fine. All of a sudden, right after I physically connect the network cable to the router, the laptop, its USB modem and/or USB keyboard become unresponsive for a few seconds and then start to temporarily freeze. I see all kinds of errors as if there is something wrong, but (after restarting and while disconnected to the Internet) neither memtest, nor testcd, nor the BIOS and its internal harddrive and many other tests report any kinds of errors. Those problems happen more often after suspending the box for a while. Also, when I boot Windows 7 all is fine.

    I only connect to the Internet when I need to (using ifconfing ... [up|down]).


    What would you suggest?



    Code:
    $ _FLR="error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not "
    
    
    $ echo "${_FLR}"
    error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not 
    
    
    $ dmesg | grep -i "${_FLR}"
    [   22.483081] systemd-udevd[2216]: Invalid rule /UNIONFS/lib/udev/rules.d/60-persistent-input.rules:6: unknown key '*ENV{ID_BUS}'
    [   24.201434] systemd-udevd[2227]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.096064] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [   26.684757] systemd-udevd[2229]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.713380] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   27.046437] systemd-udevd[2220]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   29.921399] systemd-udevd[2229]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   33.288572] systemd-udevd[2299]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   38.947027] usb 1-1.1: clear tt 1 (0060) error -71
    [   38.952651] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.956942] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.961148] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.965399] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969617] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969619] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.973854] usb 1-1.1-port4: cannot disable (err = -71)
    [   38.978117] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.982369] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.986619] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.990871] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995120] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995122] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.999405] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.003642] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.007885] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.012180] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.016568] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020794] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020798] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.025167] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.029421] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.033619] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.038041] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.042301] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046507] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046511] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.050780] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.055008] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.059273] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [   39.836575] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.844668] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.848670] usb 1-1.1.3: device descriptor read/all, error -71
    [   57.788016] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [   59.835892] systemd-udevd[2492]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 29' failed with exit code 99.
    [   88.200831] systemd-logind[2701]: Failed to start user service, ignoring: Unknown unit: user@1000.service
    [  114.846318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  211.636742] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  211.642890] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [  478.890873] sd 8:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 5493.612478] usb 1-1.1: clear tt 1 (00e0) error -71
    [ 5493.616729] usb 1-1.1: clear tt 1 (00d0) error -71
    [ 5493.621000] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.625265] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.629473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.633748] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.637997] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.638001] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.642224] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.646459] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.650767] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.655019] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.659255] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663477] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.667713] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.672004] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.676241] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.680506] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.684689] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688979] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688983] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.693259] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.697490] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.701750] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.706013] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.710270] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714471] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714475] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [13849.615013] CPU: 2 PID: 2739 Comm: Xorg Not tainted 4.7.9-64 #19
    [25224.149345] usb 1-1.1: clear tt 1 (0120) error -71
    [25224.155933] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.160182] usb 1-1.1: clear tt 1 (0110) error -71
    [25224.164461] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.168652] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.172908] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177163] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177172] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.181453] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.185686] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.189956] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.194190] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.198409] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202676] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202680] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.206907] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.211173] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.215459] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.219682] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.223921] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228206] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228211] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.232449] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.236796] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.241056] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.245299] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.249543] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253781] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253786] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.258085] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.262328] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.266553] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.270798] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [25224.275074] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.279330] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.283593] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287817] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287821] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25224.292197] usb 1-1.1-port3: cannot disable (err = -71)
    [25224.296292] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.300577] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.304819] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.309051] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.815311] usb 1-1.1: clear tt 1 (0160) error -71
    [25225.819570] usb 1-1.1: clear tt 1 (0170) error -71
    [25225.823830] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.828103] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.832330] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.836574] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840824] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840828] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25225.845079] usb 1-1.1-port3: cannot disable (err = -71)
    [25226.631992] usb 1-1.1: device not accepting address 24, error -71
    $

  2. #2
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    I meant to say USB mouse, not "USB modem"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00



supermicro super server 7045w-ntr+ picture

supermicro super server 7045w-ntr+

$280.00



*HP PROLIANT MICROSERVER GEN8 E3-1220L V2 2.30 GHz 1 TB x4 HDD 8 GB RAM *NO OS* picture

*HP PROLIANT MICROSERVER GEN8 E3-1220L V2 2.30 GHz 1 TB x4 HDD 8 GB RAM *NO OS*

$245.00



FOR PARTS - HPE ProLiant MicroServer Gen10 Plus Server picture

FOR PARTS - HPE ProLiant MicroServer Gen10 Plus Server

$199.95



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



SUPERMICRO CSE-815 4LFF BAREBONE X10DDW-i BOARD 2x HS 1x PSU NO RAM NO HDD picture

SUPERMICRO CSE-815 4LFF BAREBONE X10DDW-i BOARD 2x HS 1x PSU NO RAM NO HDD

$114.00



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$846.48



Supermicro SuperChassis 510-203B with 200W PSU 1U 11.75

Supermicro SuperChassis 510-203B with 200W PSU 1U 11.75" depth

$70.00



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$273.00



Supermicro X10SRW-F Server picture

Supermicro X10SRW-F Server

$139.99