Results 1 to 2 of 2

Thread: lots of errors after connecting to the Internet, suspending box ...

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    lots of errors after connecting to the Internet, suspending box ...

    I am running knoppix 7.7.1:


    $ uname -a
    Linux Microknoppix 4.7.9-64 #19 SMP PREEMPT Sat Oct 22 02:39:01 CEST 2016 x86_64 GNU/Linux


    on a laptop on which Windows 7 was installed. I decided to keep that baseline installation. So, I used gparted to create a partition, then went tohd ... At times I also run knoppix off the DVD.


    Everything worked just fine. All of a sudden, right after I physically connect the network cable to the router, the laptop, its USB modem and/or USB keyboard become unresponsive for a few seconds and then start to temporarily freeze. I see all kinds of errors as if there is something wrong, but (after restarting and while disconnected to the Internet) neither memtest, nor testcd, nor the BIOS and its internal harddrive and many other tests report any kinds of errors. Those problems happen more often after suspending the box for a while. Also, when I boot Windows 7 all is fine.

    I only connect to the Internet when I need to (using ifconfing ... [up|down]).


    What would you suggest?



    Code:
    $ _FLR="error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not "
    
    
    $ echo "${_FLR}"
    error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not 
    
    
    $ dmesg | grep -i "${_FLR}"
    [   22.483081] systemd-udevd[2216]: Invalid rule /UNIONFS/lib/udev/rules.d/60-persistent-input.rules:6: unknown key '*ENV{ID_BUS}'
    [   24.201434] systemd-udevd[2227]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.096064] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [   26.684757] systemd-udevd[2229]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.713380] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   27.046437] systemd-udevd[2220]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   29.921399] systemd-udevd[2229]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   33.288572] systemd-udevd[2299]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   38.947027] usb 1-1.1: clear tt 1 (0060) error -71
    [   38.952651] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.956942] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.961148] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.965399] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969617] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969619] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.973854] usb 1-1.1-port4: cannot disable (err = -71)
    [   38.978117] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.982369] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.986619] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.990871] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995120] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995122] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.999405] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.003642] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.007885] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.012180] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.016568] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020794] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020798] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.025167] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.029421] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.033619] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.038041] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.042301] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046507] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046511] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.050780] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.055008] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.059273] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [   39.836575] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.844668] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.848670] usb 1-1.1.3: device descriptor read/all, error -71
    [   57.788016] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [   59.835892] systemd-udevd[2492]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 29' failed with exit code 99.
    [   88.200831] systemd-logind[2701]: Failed to start user service, ignoring: Unknown unit: user@1000.service
    [  114.846318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  211.636742] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  211.642890] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [  478.890873] sd 8:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 5493.612478] usb 1-1.1: clear tt 1 (00e0) error -71
    [ 5493.616729] usb 1-1.1: clear tt 1 (00d0) error -71
    [ 5493.621000] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.625265] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.629473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.633748] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.637997] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.638001] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.642224] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.646459] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.650767] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.655019] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.659255] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663477] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.667713] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.672004] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.676241] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.680506] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.684689] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688979] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688983] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.693259] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.697490] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.701750] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.706013] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.710270] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714471] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714475] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [13849.615013] CPU: 2 PID: 2739 Comm: Xorg Not tainted 4.7.9-64 #19
    [25224.149345] usb 1-1.1: clear tt 1 (0120) error -71
    [25224.155933] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.160182] usb 1-1.1: clear tt 1 (0110) error -71
    [25224.164461] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.168652] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.172908] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177163] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177172] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.181453] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.185686] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.189956] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.194190] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.198409] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202676] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202680] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.206907] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.211173] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.215459] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.219682] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.223921] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228206] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228211] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.232449] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.236796] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.241056] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.245299] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.249543] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253781] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253786] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.258085] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.262328] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.266553] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.270798] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [25224.275074] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.279330] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.283593] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287817] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287821] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25224.292197] usb 1-1.1-port3: cannot disable (err = -71)
    [25224.296292] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.300577] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.304819] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.309051] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.815311] usb 1-1.1: clear tt 1 (0160) error -71
    [25225.819570] usb 1-1.1: clear tt 1 (0170) error -71
    [25225.823830] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.828103] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.832330] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.836574] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840824] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840828] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25225.845079] usb 1-1.1-port3: cannot disable (err = -71)
    [25226.631992] usb 1-1.1: device not accepting address 24, error -71
    $

  2. #2
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    I meant to say USB mouse, not "USB modem"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD picture

Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD

$75.00



Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB

$2294.99



Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB

$3299.99



Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb picture

Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb

$599.99



HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD  picture

HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD 

$78.00



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD picture

DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD

$94.50



Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server picture

Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server

$899.99



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$349.00



Dell PowerEdge M620 Blade Server picture

Dell PowerEdge M620 Blade Server

$39.99