Results 1 to 2 of 2

Thread: lots of errors after connecting to the Internet, suspending box ...

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    lots of errors after connecting to the Internet, suspending box ...

    I am running knoppix 7.7.1:


    $ uname -a
    Linux Microknoppix 4.7.9-64 #19 SMP PREEMPT Sat Oct 22 02:39:01 CEST 2016 x86_64 GNU/Linux


    on a laptop on which Windows 7 was installed. I decided to keep that baseline installation. So, I used gparted to create a partition, then went tohd ... At times I also run knoppix off the DVD.


    Everything worked just fine. All of a sudden, right after I physically connect the network cable to the router, the laptop, its USB modem and/or USB keyboard become unresponsive for a few seconds and then start to temporarily freeze. I see all kinds of errors as if there is something wrong, but (after restarting and while disconnected to the Internet) neither memtest, nor testcd, nor the BIOS and its internal harddrive and many other tests report any kinds of errors. Those problems happen more often after suspending the box for a while. Also, when I boot Windows 7 all is fine.

    I only connect to the Internet when I need to (using ifconfing ... [up|down]).


    What would you suggest?



    Code:
    $ _FLR="error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not "
    
    
    $ echo "${_FLR}"
    error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not 
    
    
    $ dmesg | grep -i "${_FLR}"
    [   22.483081] systemd-udevd[2216]: Invalid rule /UNIONFS/lib/udev/rules.d/60-persistent-input.rules:6: unknown key '*ENV{ID_BUS}'
    [   24.201434] systemd-udevd[2227]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.096064] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [   26.684757] systemd-udevd[2229]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.713380] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   27.046437] systemd-udevd[2220]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   29.921399] systemd-udevd[2229]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   33.288572] systemd-udevd[2299]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   38.947027] usb 1-1.1: clear tt 1 (0060) error -71
    [   38.952651] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.956942] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.961148] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.965399] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969617] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969619] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.973854] usb 1-1.1-port4: cannot disable (err = -71)
    [   38.978117] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.982369] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.986619] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.990871] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995120] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995122] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.999405] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.003642] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.007885] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.012180] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.016568] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020794] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020798] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.025167] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.029421] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.033619] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.038041] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.042301] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046507] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046511] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.050780] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.055008] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.059273] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [   39.836575] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.844668] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.848670] usb 1-1.1.3: device descriptor read/all, error -71
    [   57.788016] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [   59.835892] systemd-udevd[2492]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 29' failed with exit code 99.
    [   88.200831] systemd-logind[2701]: Failed to start user service, ignoring: Unknown unit: user@1000.service
    [  114.846318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  211.636742] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  211.642890] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [  478.890873] sd 8:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 5493.612478] usb 1-1.1: clear tt 1 (00e0) error -71
    [ 5493.616729] usb 1-1.1: clear tt 1 (00d0) error -71
    [ 5493.621000] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.625265] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.629473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.633748] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.637997] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.638001] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.642224] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.646459] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.650767] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.655019] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.659255] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663477] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.667713] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.672004] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.676241] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.680506] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.684689] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688979] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688983] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.693259] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.697490] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.701750] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.706013] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.710270] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714471] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714475] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [13849.615013] CPU: 2 PID: 2739 Comm: Xorg Not tainted 4.7.9-64 #19
    [25224.149345] usb 1-1.1: clear tt 1 (0120) error -71
    [25224.155933] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.160182] usb 1-1.1: clear tt 1 (0110) error -71
    [25224.164461] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.168652] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.172908] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177163] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177172] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.181453] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.185686] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.189956] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.194190] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.198409] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202676] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202680] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.206907] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.211173] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.215459] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.219682] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.223921] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228206] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228211] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.232449] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.236796] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.241056] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.245299] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.249543] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253781] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253786] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.258085] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.262328] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.266553] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.270798] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [25224.275074] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.279330] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.283593] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287817] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287821] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25224.292197] usb 1-1.1-port3: cannot disable (err = -71)
    [25224.296292] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.300577] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.304819] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.309051] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.815311] usb 1-1.1: clear tt 1 (0160) error -71
    [25225.819570] usb 1-1.1: clear tt 1 (0170) error -71
    [25225.823830] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.828103] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.832330] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.836574] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840824] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840828] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25225.845079] usb 1-1.1-port3: cannot disable (err = -71)
    [25226.631992] usb 1-1.1: device not accepting address 24, error -71
    $

  2. #2
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    I meant to say USB mouse, not "USB modem"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC picture

Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC

$1899.00



*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module picture

*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module

$749.00



Juniper 48-Port PoE GbE Network Switch  w/ Dual Power Supplies F B EX4300-48P picture

Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P

$178.99



Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License picture

Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License

$49.99



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper EX4600-40F-AFO 24 SFP+/SFP Ports 4 QSFP+ Ports Switch - Dual AC PSU picture

Juniper EX4600-40F-AFO 24 SFP+/SFP Ports 4 QSFP+ Ports Switch - Dual AC PSU

$950.00



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch

$50.95



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99