Results 1 to 2 of 2

Thread: lots of errors after connecting to the Internet, suspending box ...

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    lots of errors after connecting to the Internet, suspending box ...

    I am running knoppix 7.7.1:


    $ uname -a
    Linux Microknoppix 4.7.9-64 #19 SMP PREEMPT Sat Oct 22 02:39:01 CEST 2016 x86_64 GNU/Linux


    on a laptop on which Windows 7 was installed. I decided to keep that baseline installation. So, I used gparted to create a partition, then went tohd ... At times I also run knoppix off the DVD.


    Everything worked just fine. All of a sudden, right after I physically connect the network cable to the router, the laptop, its USB modem and/or USB keyboard become unresponsive for a few seconds and then start to temporarily freeze. I see all kinds of errors as if there is something wrong, but (after restarting and while disconnected to the Internet) neither memtest, nor testcd, nor the BIOS and its internal harddrive and many other tests report any kinds of errors. Those problems happen more often after suspending the box for a while. Also, when I boot Windows 7 all is fine.

    I only connect to the Internet when I need to (using ifconfing ... [up|down]).


    What would you suggest?



    Code:
    $ _FLR="error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not "
    
    
    $ echo "${_FLR}"
    error\|fail\|invalid\|valig\|missing\|refus\|can\'t\|cannot\|don\'t\| no \| not 
    
    
    $ dmesg | grep -i "${_FLR}"
    [   22.483081] systemd-udevd[2216]: Invalid rule /UNIONFS/lib/udev/rules.d/60-persistent-input.rules:6: unknown key '*ENV{ID_BUS}'
    [   24.201434] systemd-udevd[2227]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.096064] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [   26.684757] systemd-udevd[2229]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   26.713380] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   27.046437] systemd-udevd[2220]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 2.
    [   29.921399] systemd-udevd[2229]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   33.288572] systemd-udevd[2299]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
    [   38.947027] usb 1-1.1: clear tt 1 (0060) error -71
    [   38.952651] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.956942] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.961148] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.965399] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969617] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.969619] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.973854] usb 1-1.1-port4: cannot disable (err = -71)
    [   38.978117] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.982369] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.986619] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.990871] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995120] usb 1-1.1-port4: cannot reset (err = -71)
    [   38.995122] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   38.999405] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.003642] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.007885] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.012180] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.016568] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020794] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.020798] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.025167] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.029421] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.033619] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.038041] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.042301] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046507] usb 1-1.1-port4: cannot reset (err = -71)
    [   39.046511] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [   39.050780] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.055008] usb 1-1.1-port4: cannot disable (err = -71)
    [   39.059273] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [   39.836575] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.844668] usb 1-1.1: clear tt 1 (8080) error -71
    [   39.848670] usb 1-1.1.3: device descriptor read/all, error -71
    [   57.788016] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [   59.835892] systemd-udevd[2492]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 29' failed with exit code 99.
    [   88.200831] systemd-logind[2701]: Failed to start user service, ignoring: Unknown unit: user@1000.service
    [  114.846318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  211.636742] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  211.642890] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [  478.890873] sd 8:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 5493.612478] usb 1-1.1: clear tt 1 (00e0) error -71
    [ 5493.616729] usb 1-1.1: clear tt 1 (00d0) error -71
    [ 5493.621000] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.625265] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.629473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.633748] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.637997] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.638001] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.642224] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.646459] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.650767] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.655019] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.659255] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663473] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.663477] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.667713] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.672004] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.676241] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.680506] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.684689] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688979] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.688983] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [ 5493.693259] usb 1-1.1-port4: cannot disable (err = -71)
    [ 5493.697490] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.701750] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.706013] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.710270] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714471] usb 1-1.1-port4: cannot reset (err = -71)
    [ 5493.714475] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [13849.615013] CPU: 2 PID: 2739 Comm: Xorg Not tainted 4.7.9-64 #19
    [25224.149345] usb 1-1.1: clear tt 1 (0120) error -71
    [25224.155933] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.160182] usb 1-1.1: clear tt 1 (0110) error -71
    [25224.164461] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.168652] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.172908] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177163] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.177172] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.181453] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.185686] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.189956] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.194190] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.198409] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202676] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.202680] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.206907] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.211173] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.215459] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.219682] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.223921] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228206] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.228211] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.232449] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.236796] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.241056] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.245299] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.249543] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253781] usb 1-1.1-port4: cannot reset (err = -71)
    [25224.253786] usb 1-1.1-port4: Cannot enable. Maybe the USB cable is bad?
    [25224.258085] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.262328] usb 1-1.1-port4: cannot disable (err = -71)
    [25224.266553] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.270798] hub 1-1.1:1.0: hub_ext_port_status failed (err = -71)
    [25224.275074] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.279330] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.283593] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287817] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.287821] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25224.292197] usb 1-1.1-port3: cannot disable (err = -71)
    [25224.296292] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.300577] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.304819] usb 1-1.1-port3: cannot reset (err = -71)
    [25224.309051] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.815311] usb 1-1.1: clear tt 1 (0160) error -71
    [25225.819570] usb 1-1.1: clear tt 1 (0170) error -71
    [25225.823830] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.828103] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.832330] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.836574] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840824] usb 1-1.1-port3: cannot reset (err = -71)
    [25225.840828] usb 1-1.1-port3: Cannot enable. Maybe the USB cable is bad?
    [25225.845079] usb 1-1.1-port3: cannot disable (err = -71)
    [25226.631992] usb 1-1.1: device not accepting address 24, error -71
    $

  2. #2
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    I meant to say USB mouse, not "USB modem"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Amiga Eyetech EZCD 4 device EIDE Interface for the A1200 Untested picture

Amiga Eyetech EZCD 4 device EIDE Interface for the A1200 Untested

$49.99



Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200 picture

Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200

$35.99



Commodore A590 SCSI Western Digital XT 20MB Disk Drive Amiga 500 Computer Untest picture

Commodore A590 SCSI Western Digital XT 20MB Disk Drive Amiga 500 Computer Untest

$399.99



Vintage Amiga ICD ADSpeed 14mhz 68000 accelerator with 32kb SRAM, 16kb cache picture

Vintage Amiga ICD ADSpeed 14mhz 68000 accelerator with 32kb SRAM, 16kb cache

$117.00



(Rare) Commodore Amiga 3000 w/Monitor and Keyboard picture

(Rare) Commodore Amiga 3000 w/Monitor and Keyboard

$2000.00



Amiga A1200 Power-Tower (mod ready and fast) Read Technical Notes & Decription picture

Amiga A1200 Power-Tower (mod ready and fast) Read Technical Notes & Decription

$1300.00



Amiga External Drive Adapter and LONG Cables. Works with Gotek and Amiga Drives picture

Amiga External Drive Adapter and LONG Cables. Works with Gotek and Amiga Drives

$32.00



Commodore Amiga 500 with Original Box.   Power Supply Games and More  1 MEG No.2 picture

Commodore Amiga 500 with Original Box. Power Supply Games and More 1 MEG No.2

$468.04



' Nam 1965-1975 Commodore Amiga on 3.5

' Nam 1965-1975 Commodore Amiga on 3.5" disks W Box Manuals US Seller See Pics

$30.00



Amiga 600 Gotek USB Floppy Drive Emulator Complete Kit with Gotek picture

Amiga 600 Gotek USB Floppy Drive Emulator Complete Kit with Gotek

$41.05