Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ADATA Ultimate Series SU630 Internal SSD 240GB SATA III 2.5

ADATA Ultimate Series SU630 Internal SSD 240GB SATA III 2.5" 3D QLC 520MBps

$27.99



Netac 256GB SSD 2.5'' SATA III 6Gb/s Internal Solid State Drive 500MB/s PC/Latop picture

Netac 256GB SSD 2.5'' SATA III 6Gb/s Internal Solid State Drive 500MB/s PC/Latop

$23.56



1TB/2TB SATA 3 SSD Hard Drive 2.5

1TB/2TB SATA 3 SSD Hard Drive 2.5" Internal External Solid State Drive PC Laptop

$32.44



Netac 240GB SSD 2.5'' SATA III 6Gbp/s Internal Solid State Drive 500MB/S picture

Netac 240GB SSD 2.5'' SATA III 6Gbp/s Internal Solid State Drive 500MB/S

$21.79



SAMSUNG 870 EVO Series 2.5

SAMSUNG 870 EVO Series 2.5" 500GB SATA III V-NAND Internal Solid State Drive(...

$59.99



SAMSUNG 870 EVO Series 2.5

SAMSUNG 870 EVO Series 2.5" 1TB SATA III V-NAND Internal Solid State Drive (SSD)

$109.99



Samsung - 980 PRO 1TB PCIe Gen 4 x4 NVMe Gaming Internal Solid State Drive picture

Samsung - 980 PRO 1TB PCIe Gen 4 x4 NVMe Gaming Internal Solid State Drive

$149.99



Samsung - 870 EVO 500GB SATA 2.5

Samsung - 870 EVO 500GB SATA 2.5" Internal Solid State Drive

$59.99



ADATA Ultimate Series SU650 Internal SSD 120GB SATA III 2.5

ADATA Ultimate Series SU650 Internal SSD 120GB SATA III 2.5" 3D NAND 520MBps

$21.99



1TB 7mm 2.5in SSD SATA III PC Internal Hard Drives Solid State Drive High Speed picture

1TB 7mm 2.5in SSD SATA III PC Internal Hard Drives Solid State Drive High Speed

$33.37