Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Knoppix 9.1 Live Linux GNU Bootable USB Flash Drive USA picture

Knoppix 9.1 Live Linux GNU Bootable USB Flash Drive USA

$14.77



Knoppix NSM 1.2 picture

Knoppix NSM 1.2

$16.00



Knoppix Live GNU Linux System 9.1 on Bootable CD / DVD / USB Flash Drive picture

Knoppix Live GNU Linux System 9.1 on Bootable CD / DVD / USB Flash Drive

$9.99



Hamshack Live DVD-ROM picture

Hamshack Live DVD-ROM

$12.00



Linux Knoppix 4.0.2 Installation Disc picture

Linux Knoppix 4.0.2 Installation Disc

$39.99



Knoppix Linux Bootable OS v8.6

Knoppix Linux Bootable OS v8.6 "Original Live Operating System" 16G USB Stick

$19.95



KNOPPIX 9.1 LINUX INSTALL & LIVE DVD picture

KNOPPIX 9.1 LINUX INSTALL & LIVE DVD

$9.99



Acer Aspire One 9 inch Netbook ZG5 512MB RAM 8GB SSD HD Knoppix Linux WiFi VGA picture

Acer Aspire One 9 inch Netbook ZG5 512MB RAM 8GB SSD HD Knoppix Linux WiFi VGA

$79.99



Knoppix Linux Bootable OS v8.6

Knoppix Linux Bootable OS v8.6 "Original Live Operating System" 32G USB Stick

$20.30