Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Samsung 870 EVO Series 500GB 2.5

Samsung 870 EVO Series 500GB 2.5" SATA III Internal SSD MZ-77E500B/AM New Sealed

$59.00



SanDisk 1TB SSD Plus, Internal Solid State Drive - SDSSDA-1T00-G26 picture

SanDisk 1TB SSD Plus, Internal Solid State Drive - SDSSDA-1T00-G26

$74.99



DT8XJ Dell Intel DC S3700 800GB SATA 6Gb/s 2.5

DT8XJ Dell Intel DC S3700 800GB SATA 6Gb/s 2.5" SSD 0DT8XJ SSDSC2BA800G3R

$59.00



SSDSC2BA800G3P Intel SSD DC S3700 Series 800GB 6Gb/s 2.5'' SATA SSD picture

SSDSC2BA800G3P Intel SSD DC S3700 Series 800GB 6Gb/s 2.5'' SATA SSD

$79.00



Crucial BX500 240GB Internal SSD,Micron 3D NAND SATA CT240BX500SSD1 - OEM item picture

Crucial BX500 240GB Internal SSD,Micron 3D NAND SATA CT240BX500SSD1 - OEM item

$16.99



Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot picture

Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot

$13.99



Western Digital  WDS500G1B0A-00H9H0 500GB 2.5

Western Digital WDS500G1B0A-00H9H0 500GB 2.5" SSD Grade A SKU 5036

$18.99



Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5

Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot

$14.99



Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot picture

Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot

$198.99



Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5

Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5" SATA III 6GB/s for PC/MAC Lot

$197.99