Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell R740XD 24SFF 12 NVMe 2.9Ghz 48-C 256GB H730P 2x10G+2x1G NIC 2x1100W Rails picture

Dell R740XD 24SFF 12 NVMe 2.9Ghz 48-C 256GB H730P 2x10G+2x1G NIC 2x1100W Rails

$6332.07



Dell R740XD 24SFF 12 NVMe 2.1Ghz 32-C 256GB H730P 2x10G+2x1G NIC 2x1100W Rails picture

Dell R740XD 24SFF 12 NVMe 2.1Ghz 32-C 256GB H730P 2x10G+2x1G NIC 2x1100W Rails

$3932.07



Dell R740XD 24SFF+4SFF 2.8Ghz 56-C 256GB H740P 10G SFP+ NIC 2x1100W 12x Trays picture

Dell R740XD 24SFF+4SFF 2.8Ghz 56-C 256GB H740P 10G SFP+ NIC 2x1100W 12x Trays

$4704.08



Dell PowerEdge R740xd Server 2x Gold 6140 2.30Ghz 36-Core 512GB H330 picture

Dell PowerEdge R740xd Server 2x Gold 6140 2.30Ghz 36-Core 512GB H330

$2194.80



INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor    @24 picture

INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor @24

$99.99



Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5 picture

Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5

$46.00



Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION picture

Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION

$12.00



Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU picture

Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU

$39.99



HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA picture

HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA

$243.59



Dell Precision 5810 Tower Intel Xeon E5-1603v3 2.8GHz 8GB RAM 500GB HDD W10P GPU picture

Dell Precision 5810 Tower Intel Xeon E5-1603v3 2.8GHz 8GB RAM 500GB HDD W10P GPU

$129.99