Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


CISCO ASA5505-BUN-K9 SECURITY FIREWALL UPGRADE  ASA5505 picture

CISCO ASA5505-BUN-K9 SECURITY FIREWALL UPGRADE ASA5505

$59.90



Genuine Fortinet Fortigate FG-60D Firewall Security Appliance  Fortigate 60D picture

Genuine Fortinet Fortigate FG-60D Firewall Security Appliance Fortigate 60D

$34.95



Fortinet FortiGate FG-60D-POE  Firewall With Power Supply  ver 6.0.12 picture

Fortinet FortiGate FG-60D-POE Firewall With Power Supply ver 6.0.12

$55.00



Fortinet FortiGate FG-60D Firewall Security Appliance with Power Supply picture

Fortinet FortiGate FG-60D Firewall Security Appliance with Power Supply

$65.00



ASA5512-X CISCO ASA 5512-X ADAPTIVE NETWORK SECURITY/FIREWALL APPLIANCE picture

ASA5512-X CISCO ASA 5512-X ADAPTIVE NETWORK SECURITY/FIREWALL APPLIANCE

$69.00



Cisco ASA 5506-X Network Security Firewall picture

Cisco ASA 5506-X Network Security Firewall

$100.00



Fortinet Fortigate 80E FG-80E Firewall Security Appliance picture

Fortinet Fortigate 80E FG-80E Firewall Security Appliance

$215.00



ASA5515-K9 Cisco ASA5515-X Firewall with Security Plus & 250 AnyConnect & More picture

ASA5515-K9 Cisco ASA5515-X Firewall with Security Plus & 250 AnyConnect & More

$149.99



Fortinet Fortigate-50E FG-50E Network Security Firewall Initialized Power Cable picture

Fortinet Fortigate-50E FG-50E Network Security Firewall Initialized Power Cable

$67.80



6-Port Gigabit PFsense Firewall Intel Pentium 2GHz AES-NI 4GB RAM 320GB HDD picture

6-Port Gigabit PFsense Firewall Intel Pentium 2GHz AES-NI 4GB RAM 320GB HDD

$219.95