Results 1 to 4 of 4

Thread: add sata support on knoppix 4.0.2

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    2

    add sata support on knoppix 4.0.2

    hI all,

    I have a software compiled on this old knoppix version.
    I want to transfer this one on a new PC with SATA Hard disk but knoppix version 4.0.2 doesn't support it.
    Is possible add sata support?
    Thanks

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi.

    Which kernel version does this old Knoppix version use? (run "uname -a" in a terminal)

    Did you try to use AHCI compatibility mode (might be set up in the BIOS)?

    It could be worth to consider to use a virtual machine with the old Knoppix inside if your system is capable enough.

  3. #3
    Junior Member
    Join Date
    Mar 2017
    Posts
    2
    uname -a result:

    Linux Knoppix 2.6.12 #2 SMP Tue Aug 9 23:20:52 CEST 2005 i686 GNU/Linux

    I'd like use a real PC. The virtual machine is my last options...

  4. #4
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Now, it is clear that you have a really old kernel version.

    I think that your only chance will be that the last Linux 2.6 kernel supports your SATA controller chip. In that case you would have to compile a Linux kernel from source that includes the support for cloop files used by Knoppix. Linux kernel sources are available at kernel.org.

    The first thing you will need is the hardware configuration of your new computer system. You could run a recent Knoppix version and issue the command
    Code:
    sudo lspci
    in order to get the PCI id of your SATA controller. Then, you will have to do some research to find out if there is any support for your SATA controller chip in the last Linux 2.6 kernel sources.

    Another possibility could be the use of an IDE controller supported by Knoppix 4.0.2 and a PATA-SATA adapter to connect your HDD.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45 picture

For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45

$170.99



NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping*

$18.00



GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module  picture

GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module

$6.90



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478  picture

Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478

$24.99



Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module picture

Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module

$6.98



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



Cisco GLC-T 1000Base-T SFP Transceiver Module RJ-45  picture

Cisco GLC-T 1000Base-T SFP Transceiver Module RJ-45

$24.99



HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC picture

HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC

$65.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.90