Results 1 to 4 of 4

Thread: add sata support on knoppix 4.0.2

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    2

    add sata support on knoppix 4.0.2

    hI all,

    I have a software compiled on this old knoppix version.
    I want to transfer this one on a new PC with SATA Hard disk but knoppix version 4.0.2 doesn't support it.
    Is possible add sata support?
    Thanks

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi.

    Which kernel version does this old Knoppix version use? (run "uname -a" in a terminal)

    Did you try to use AHCI compatibility mode (might be set up in the BIOS)?

    It could be worth to consider to use a virtual machine with the old Knoppix inside if your system is capable enough.

  3. #3
    Junior Member
    Join Date
    Mar 2017
    Posts
    2
    uname -a result:

    Linux Knoppix 2.6.12 #2 SMP Tue Aug 9 23:20:52 CEST 2005 i686 GNU/Linux

    I'd like use a real PC. The virtual machine is my last options...

  4. #4
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Now, it is clear that you have a really old kernel version.

    I think that your only chance will be that the last Linux 2.6 kernel supports your SATA controller chip. In that case you would have to compile a Linux kernel from source that includes the support for cloop files used by Knoppix. Linux kernel sources are available at kernel.org.

    The first thing you will need is the hardware configuration of your new computer system. You could run a recent Knoppix version and issue the command
    Code:
    sudo lspci
    in order to get the PCI id of your SATA controller. Then, you will have to do some research to find out if there is any support for your SATA controller chip in the last Linux 2.6 kernel sources.

    Another possibility could be the use of an IDE controller supported by Knoppix 4.0.2 and a PATA-SATA adapter to connect your HDD.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's

$299.00



HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED picture

HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED

$179.99



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED picture

HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED

$550.00



HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD picture

HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD

$750.00



HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs picture

HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs

$399.00



HP ProLiant Microserver Micro Server HSTNS-5151 untested picture

HP ProLiant Microserver Micro Server HSTNS-5151 untested

$75.00



HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's

$229.99



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001 picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001

$849.99



HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅ picture

HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅

$79.99