Results 1 to 4 of 4

Thread: add sata support on knoppix 4.0.2

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    2

    add sata support on knoppix 4.0.2

    hI all,

    I have a software compiled on this old knoppix version.
    I want to transfer this one on a new PC with SATA Hard disk but knoppix version 4.0.2 doesn't support it.
    Is possible add sata support?
    Thanks

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi.

    Which kernel version does this old Knoppix version use? (run "uname -a" in a terminal)

    Did you try to use AHCI compatibility mode (might be set up in the BIOS)?

    It could be worth to consider to use a virtual machine with the old Knoppix inside if your system is capable enough.

  3. #3
    Junior Member
    Join Date
    Mar 2017
    Posts
    2
    uname -a result:

    Linux Knoppix 2.6.12 #2 SMP Tue Aug 9 23:20:52 CEST 2005 i686 GNU/Linux

    I'd like use a real PC. The virtual machine is my last options...

  4. #4
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Now, it is clear that you have a really old kernel version.

    I think that your only chance will be that the last Linux 2.6 kernel supports your SATA controller chip. In that case you would have to compile a Linux kernel from source that includes the support for cloop files used by Knoppix. Linux kernel sources are available at kernel.org.

    The first thing you will need is the hardware configuration of your new computer system. You could run a recent Knoppix version and issue the command
    Code:
    sudo lspci
    in order to get the PCI id of your SATA controller. Then, you will have to do some research to find out if there is any support for your SATA controller chip in the last Linux 2.6 kernel sources.

    Another possibility could be the use of an IDE controller supported by Knoppix 4.0.2 and a PATA-SATA adapter to connect your HDD.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


pi1541 Disk Emulator for Commodore picture

pi1541 Disk Emulator for Commodore

$34.95



commodore 64 sign picture

commodore 64 sign

$8.25



Megabit128 MultiRom for the Commodore 128 computer picture

Megabit128 MultiRom for the Commodore 128 computer

$30.00



New Commodore C64/C128 1581 replacement power switch - perfect fit picture

New Commodore C64/C128 1581 replacement power switch - perfect fit

$4.95



Commodore 64 decal picture

Commodore 64 decal

$2.28



VINTAGE COMMODORE 64 SINGLE DRIVE FLOPPY DISC MODEL 1541 picture

VINTAGE COMMODORE 64 SINGLE DRIVE FLOPPY DISC MODEL 1541

$40.00



Commodore SX-64 parts - Floppy Controller board picture

Commodore SX-64 parts - Floppy Controller board

$95.00



Commodore C 64 keyboard parts - plungers and springs a lot of 10 picture

Commodore C 64 keyboard parts - plungers and springs a lot of 10

$15.00



Commodore 64 Serial Cable C64 Disk Drive & printer 1541 1571 9' L NEW USA Seller picture

Commodore 64 Serial Cable C64 Disk Drive & printer 1541 1571 9' L NEW USA Seller

$10.80



Commodore 64 SD Card Reader (SD2IEC) and Epyx Fastload Cartridge combo  C64 picture

Commodore 64 SD Card Reader (SD2IEC) and Epyx Fastload Cartridge combo  C64

$35.26