-
add sata support on knoppix 4.0.2
hI all,
I have a software compiled on this old knoppix version.
I want to transfer this one on a new PC with SATA Hard disk but knoppix version 4.0.2 doesn't support it.
Is possible add sata support?
Thanks
-
Senior Member
registered user
Hi.
Which kernel version does this old Knoppix version use? (run "uname -a" in a terminal)
Did you try to use AHCI compatibility mode (might be set up in the BIOS)?
It could be worth to consider to use a virtual machine with the old Knoppix inside if your system is capable enough.
-
uname -a result:
Linux Knoppix 2.6.12 #2 SMP Tue Aug 9 23:20:52 CEST 2005 i686 GNU/Linux
I'd like use a real PC. The virtual machine is my last options...
-
Senior Member
registered user
Now, it is clear that you have a really old kernel version.
I think that your only chance will be that the last Linux 2.6 kernel supports your SATA controller chip. In that case you would have to compile a Linux kernel from source that includes the support for cloop files used by Knoppix. Linux kernel sources are available at kernel.org.
The first thing you will need is the hardware configuration of your new computer system. You could run a recent Knoppix version and issue the command in order to get the PCI id of your SATA controller. Then, you will have to do some research to find out if there is any support for your SATA controller chip in the last Linux 2.6 kernel sources.
Another possibility could be the use of an IDE controller supported by Knoppix 4.0.2 and a PATA-SATA adapter to connect your HDD.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$479.96
Red Hat Enterprise Linux 5 Server - New and Sealed
$19.99
Red Hat Enterprise Linux 5 Server RHF032US-R1 NEW Sealed
$59.95
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$799.96
Asus ESC4000 G3 Barebones 0GB HDD Linux
$200.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
IBM Power 9 S922 8-Core 3.4-3.9Ghz 128Gb DDR4 2U Linux Server - 9009-22a
$3439.96
IBM 8247-21L S812L 10-core 3.42 GHz 128GB 2x 300gb 12x SFF Power8 Linux Server
$649.00
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$199.87
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99