Hi altogether
1- I am using knop_V7.2 which I like very much (ISO_booting). But it may concern other
2- When reconnecting after sleeping my session it is impossible to reconnect the
Network. How can I do along with the supposed "same session" ?
3- Moreover the PC blocks entirely after a LONG automatic PAUSE.
4- When disconnecting properly V7.2 proposes six BUTTONS:
. 1 for Stopping defintily -- 1 for Rebooting -- 1 for leaving the "Session"
1 to "Annihilate" -- 1 for "HIBERNTING=? No real Action -- 1 to "SUSPEND"
( with the NetWork lost after reconnecting the session).
5- I post here even if I think that the "Networking Forum" is out of working
Can somebody explain me the role of the "Hibernate button" ? ...
AND how to RETRIEVE the Netwok?
Thanks
knp
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
WD Ultrastar DC HC520 12TB SATA III 3.5" Enterprise HDD (HUH721212ALE600)
$100.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.03