Hi altogether
1- I am using knop_V7.2 which I like very much (ISO_booting). But it may concern other
2- When reconnecting after sleeping my session it is impossible to reconnect the
Network. How can I do along with the supposed "same session" ?
3- Moreover the PC blocks entirely after a LONG automatic PAUSE.
4- When disconnecting properly V7.2 proposes six BUTTONS:
. 1 for Stopping defintily -- 1 for Rebooting -- 1 for leaving the "Session"
1 to "Annihilate" -- 1 for "HIBERNTING=? No real Action -- 1 to "SUSPEND"
( with the NetWork lost after reconnecting the session).
5- I post here even if I think that the "Networking Forum" is out of working
Can somebody explain me the role of the "Hibernate button" ? ...
AND how to RETRIEVE the Netwok?
Thanks
knp
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM
$1869.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 512GB | P204I | 2x1.2TB 10KRPM
$2699.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00