Hi altogether
1- I am using knop_V7.2 which I like very much (ISO_booting). But it may concern other
2- When reconnecting after sleeping my session it is impossible to reconnect the
Network. How can I do along with the supposed "same session" ?
3- Moreover the PC blocks entirely after a LONG automatic PAUSE.
4- When disconnecting properly V7.2 proposes six BUTTONS:
. 1 for Stopping defintily -- 1 for Rebooting -- 1 for leaving the "Session"
1 to "Annihilate" -- 1 for "HIBERNTING=? No real Action -- 1 to "SUSPEND"
( with the NetWork lost after reconnecting the session).
5- I post here even if I think that the "Networking Forum" is out of working
Can somebody explain me the role of the "Hibernate button" ? ...
AND how to RETRIEVE the Netwok?
Thanks
knp
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99