Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS

$334.40



Dell PowerEdge R630 Server 10-Bay Barebones picture

Dell PowerEdge R630 Server 10-Bay Barebones

$250.00



Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS

$353.60



Supermicro 36-Bay 4U SuperStorage Server SSG-6047R-E1R36L 64GB RAM 2X E5-2609V2 picture

Supermicro 36-Bay 4U SuperStorage Server SSG-6047R-E1R36L 64GB RAM 2X E5-2609V2

$399.99



Dell Poweredge R620 2x E5-2670 2.6ghz 16-Cores / 32gb / H710 / 2x Trays / 750w picture

Dell Poweredge R620 2x E5-2670 2.6ghz 16-Cores / 32gb / H710 / 2x Trays / 750w

$89.99



HYVE ZEUS V1 1U SERVER 2x 10 CORE E5-2670V2 2.5GHz 32GB RAM RISER RAIL NO HDD picture

HYVE ZEUS V1 1U SERVER 2x 10 CORE E5-2670V2 2.5GHz 32GB RAM RISER RAIL NO HDD

$164.00



Dell PowerEdge R620 Server 2x E5-2660v2 10C (20 Cores Total) 96GB 2x 1TB w/ Raid picture

Dell PowerEdge R620 Server 2x E5-2660v2 10C (20 Cores Total) 96GB 2x 1TB w/ Raid

$222.30



Dell PowerEdge R210 Server - 4NY1WL1 picture

Dell PowerEdge R210 Server - 4NY1WL1

$129.00



Supermicro 2U Server 8 HD Bay 3.5 LFF E ATX Storage Chassis TQ Direct Connect picture

Supermicro 2U Server 8 HD Bay 3.5 LFF E ATX Storage Chassis TQ Direct Connect

$199.00



Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T picture

Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T

$279.00