-
Senior Member
Knoppix 8.1 USB-stick installation
Successfully installed release 8.1 on USB stick...works great on my AMD desktop with dual screens, though two minor issues: 1) Screen layout configured with xrandr to my needs - file saved in --->knoppix/.screenlayout with name ScreenLayout.sh. After reboot the system does not boot with this configuration and I have to configure each time I start the computer. 2) Running ->System Settings, ->Workspace Themes ->Cursor Theme I change the mouse cursor to "redglass 48". After reboot the system does not boot with this configuration either and I have to configure the mouse cursor theme each time I start the computer. What do I do wrong? Is there an easy fix which I can do myself?
-
Senior Member
I'm just wondering: Does it make any sense to look at "/etc/X11/xorg.conf" for a solution to the issue? Here are Section Monitor and Section Device:------------ -------------- --------- --
# Monitor section --->auto-generated by KNOPPIX mkxorgconfig Section "Monitor" Identifier "Monitor0" ModelName "Generic Monitor" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors # HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors # VertRefresh 50.0 - 76.0 # Very conservative. May flicker. # VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker. TFT default. Option "MonitorLayout" "LVDS,AUTO" EndSection . . ----------------
# Section "Device" ---> ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # Driver (chipset) autodetect VendorName "All" BoardName "All" # BusID "PCI:1:0:0" # compiz, beryl 3D-Support with DRI & Composite Option "XAANoOffscreenPixmaps" Option "AllowGLXWithComposite" "true" # Some Radeon cards don't handle this well. # Option "EnablePageFlip" "true" Option "TripleBuffer" "true" # Tweaks for the xorg 7.4 (otherwise broken) "intel" driver # Option "Tiling" "no" Option "Legacy3D" "false" # These two lines are (presumably) needed to prevent fonts from being scrambled Option "XaaNoScanlineImageWriteRect" "true" Option "XaaNoScanlineCPUToScreenColorExpandFill" "true" EndSection------------
Last edited by Karibu; 10-08-2017 at 11:22 PM.
-
-
Senior Member
[SOLVED] Knoppix 8.1 USB-stick installation
Thanks for the hint... yes I did and it solved issue #2 - Mouse cursor configuration remains after reboot as desired. For issue #1 - Screen layout - I just change the video cable connections to the PC.
Last edited by Karibu; 10-10-2017 at 06:28 AM.
-
Senior Member
I'm not really happy with the solution though ... ![Confused](images/smilies/confused.png)
because now I have trouble to get the cursor size bigger.
I would like to have redglass 48, which I can choose in System Settings, as default and available after each reboot.
-
/home/knoppix/.config/gtk-3.0/settings.ini ?
-
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
/home/knoppix/.config/gtk-3.0/settings.ini ?
[Settings]
gtk-theme-name=Raleigh
gtk-icon-theme-name=gnome
gtk-font-name=Bitstream Vera Sans 12
gtk-cursor-theme-name=core
gtk-cursor-theme-size=18
gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=1
gtk-enable-input-feedback-sounds=1
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle=hintslight
gtk-xft-rgba=rgb
I'm not sure how to change the cursor theme here?
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
[Session]
window_manager=compiz
disable_autostart=no
polkit/command=lxpolkit
clipboard/command=lxclipboard
xsettings_manager/command=build-in
proxy_manager/command=build-in
keyring/command=ssh-agent
quit_manager/command=lxsession-logout
quit_manager/image=/usr/share/lxde/images/logout-banner.png
quit_manager/layout=top
lock_manager/command=lxlock
terminal_manager/command=lxterminal
launcher_manager/command=lxpanelctl
[GTK]
sNet/ThemeName=Raleigh
sNet/IconThemeName=gnome
sGtk/FontName=Bitstream Vera Sans 12
iGtk/ToolbarStyle=3
iGtk/ButtonImages=1
iGtk/MenuImages=1
sGtk/CursorThemeName=redglass
iGtk/CursorThemeSize=18
iXft/Antialias=1
iXft/Hinting=1
sXft/HintStyle=hintslight
sXft/RGBA=rgb
iNet/EnableEventSounds=1
iNet/EnableInputFeedbackSounds=1
sGtk/ColorScheme=
iGtk/ToolbarIconSize=3
[Mouse]
AccFactor=20
AccThreshold=10
LeftHanded=0
[Keyboard]
Delay=500
Interval=30
Beep=1
[State]
guess_default=true
[Dbus]
lxde=true
[Environment]
menu_prefix=lxde-
I'm confused...![Confused](images/smilies/confused.png)
here redglass shows up ( size 18 though). Which of the config files is responsible when booting?
-
Senior Member
Eureka! It works....It's ....LXDE/dektop.conf ![Very Happy](images/smilies/icon_biggrin.gif)
Thank you philo, I changed line
to
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch picture](/store/img/g/sOIAAOSwtV1mUVhk/s-l225/Cisco-SG300-52-Port-Gigabit-Managed-Rack-Mountable.jpg)
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
![ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301 picture](/store/img/g/J0AAAOSwSiVlu-xI/s-l225/ARUBA-J9772A-2530-48G-PoE-48-PORT-ETHERNET-SWITCH-.jpg)
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
![HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201 picture](/store/img/g/RNgAAOSwrTtlQZet/s-l225/HPE-ARUBA-2530-24G-J9773A-PoE-24-PORT-GIGABIT-ETHE.jpg)
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$93.24
![Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module picture](/store/img/g/adoAAOSwyBpmPhv-/s-l225/Cisco-Catalyst-C9300-24UX-A-24-Port-10G-mGig-UPOE-.jpg)
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$579.97
![TP-Link TL-SG1008D 10/100/1000 Mbps 8-Port Gigabit Desktop Ethernet Switch. picture](/store/img/g/TJAAAOSwlcxmZi56/s-l225/TP-Link-TL-SG1008D-10-100-1000-Mbps-8-Port-Gigabit.jpg)
TP-Link TL-SG1008D 10/100/1000 Mbps 8-Port Gigabit Desktop Ethernet Switch.
$10.00
![NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter picture](/store/img/g/GtAAAOSw441l3Jx1/s-l225/NETGEAR-GS108-ProSafe-8-Port-GbE-Unmanaged-Switch-.jpg)
NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter
$14.99
![Cisco WS-C2950-24 Layer 2 Switch 24-Port 10/100 Catalyst 2950 Series picture](/store/img/g/TtcAAOSw5MhmYe1E/s-l225/Cisco-WS-C2950-24-Layer-2-Switch-24-Port-10-100-Ca.jpg)
Cisco WS-C2950-24 Layer 2 Switch 24-Port 10/100 Catalyst 2950 Series
$25.00
![TP-LINK TL-SF1005D 5-Port 10/100Mbps Desktop Switch picture](/store/img/g/EwEAAOSwOZpjOzYc/s-l225/TP-LINK-TL-SF1005D-5-Port-10-100Mbps-Desktop-Switc.jpg)
TP-LINK TL-SF1005D 5-Port 10/100Mbps Desktop Switch
$8.99
![TRENDnet TEG-S17D 16-Port Gigabit Unmanaged Network Switch picture](/store/img/g/~~wAAOSwq0lkke3m/s-l225/TRENDnet-TEG-S17D-16-Port-Gigabit-Unmanaged-Networ.jpg)
TRENDnet TEG-S17D 16-Port Gigabit Unmanaged Network Switch
$50.00
![Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture](/store/img/g/kjQAAOSwNkhj0o7Y/s-l225/Fortinet-FortiSwitch-FS-124D-POE-24-Port-Gigabit-E.jpg)
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97