'Google is your friend', e.g. :
https://wiki.debian.org/NTP
https://wiki.debian.org/DateTime
https://linuxconfig.org/how-to-setup...-stretch-linux
et alii.
The ntpdate package is not necessary if you have ntp.
There is a ntp.conf file in /etc but I'm not knowledgeable enough to know how to configure that file to my needs.
# /etc/ntp.conf,configuration for ntpd; see ntp.conf(5) for help
driftfile/var/lib/ntp/ntp.drift
# Enable this if youwant statistics to be logged.
#statsdir/var/log/ntpstats/statistics loopstats peerstats clockstats
filegen loopstatsfile loopstats type day enable
filegen peerstatsfile peerstats type day enable
filegen clockstatsfile clockstats type day enable
# You do need totalk to an NTP server or two (or three).
#serverntp.your-provider.example
# pool.ntp.org mapsto about 1000 low-stratum NTP servers. Your server will
# pick a differentset every time it starts up. Please consider joining the
# pool:<http://www.pool.ntp.org/join.html>
pool0.debian.pool.ntp.org iburst
pool1.debian.pool.ntp.org iburst
pool2.debian.pool.ntp.org iburst
pool3.debian.pool.ntp.org iburst
# Access controlconfiguration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details. The webpage <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also behelpful.
# Note that"restrict" applies to both servers and clients, so aconfiguration
# that might beintended to block requests from certain clients could also end
# up blockingreplies from your own upstream servers.
# By default,exchange time with everybody, but don't allow configuration.
restrict -4 defaultkod notrap nomodify nopeer noquery limited
restrict -6 defaultkod notrap nomodify nopeer noquery limited
# Local users mayinterrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1
# Needed for addingpool entries
restrict sourcenotrap nomodify noquery
# Clients from this(example!) subnet have unlimited access, but only if
# cryptographicallyauthenticated.
#restrict192.168.123.0 mask 255.255.255.0 notrust
# If you want toprovide time to your local subnet, change the next line.
# (Again, theaddress is an example only.)
#broadcast192.168.123.255
# If you want tolisten to time broadcasts on your local subnet, de-comment the
# next lines. Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient
'Google is your friend', e.g. :
https://wiki.debian.org/NTP
https://wiki.debian.org/DateTime
https://linuxconfig.org/how-to-setup...-stretch-linux
et alii.
The ntpdate package is not necessary if you have ntp.
Last edited by philo; 10-15-2017 at 08:45 AM.
No doubt you read in:
http://knoppix.net/wiki/Cheat_Codes#Micro-Remastering
.....
To change other boot options, look within the file 'syslinux.cfg' for the LABEL line of the way you always start with Knoppix. If you for example always use "knoppix" (and not "knoppix64") then look for "LABEL knoppix". Don't change the following KERNEL line but insert additional or change existent cheatcodes within the APPEND line.
LABEL knoppix
KERNEL linux
APPEND ramdisk_size=100000 lang=en keyboard=es xkeyboard=es apm=power-off ...
Note: If you are using Knoppix 64 bit, you have also to change the settings within '/mnt-system/boot/syslinux/syslnx32.cfg' and '/mnt-system/boot/syslinux/syslnx64.cfg'
Your /etc/ntp.conf file is the same as mine. Your problem must be elsewhere.
I guess my problem is the Date and Time entered in the BIOS.
Right now it seems to be + 7 hours Pacific Standard Time and
I'm not able to change Date and Time in BIOS, still working on it.
To start the ntp service at boot you must edit /etc/rc.local and replace SERVICES="cups" with SERVICES="cups ntp"
Time issue is solved finally. What I had to do in my case:
1) As philo recommended earlier:
The path for syslinux.cfg is '/mnt-system/boot/syslinux'.Check
1) BIOS time (hardware clock) --> UTC
2) /etc/adjtime --> UTC [instaead of LOCAL]
3) /etc/timezone ---> America/Vancouver
4) and maybe in :
/media/sd__/boot/syslinux/syslinux.cfg
LABEL knoppix,
LABEL knoppix64
add inside APPEND: --> tz=America/Vancouver
I also changed - as philo recommended -
'/mnt-system/boot/syslinux/syslnx32.cfg' and
'/mnt-system/boot/syslinux/syslnx64.cfg'
and added inside APPEND: --> tz=America/Vancouver
Thanks for the help!
OEM 130W Charger For Dell XPS 15 9530 9550 9560 9570 7590 06TTY6 Power Adapter
$35.99
M1MYR Dell OEM 130W AC Adapter 4.5mm Small Tip 4 Precision 5520 5530 M20 4MFJT
$18.04
NEW OEM USB-C Type-C Charger For Dell XPS 15 2in1 9575 Precision 5530 130W
$35.99
NEW OEM F62G0 Battery For Dell Inspiron 13 5370 7370 7373 7380 7386 39DY5 RPJC3
$32.43
OEM Dell Inspiron 11 13 14 15 17 3000 5000 7000 AC Adapter Charger 65W 4.5mm Tip
$10.99
OEM 130W USB-C Type-C Charger for Dell XPS 15 9500 9570 9575 17 9700 DA130PM170
$35.88
Dell Original OEM 45W 19.5V AC Adapter Charger 070VTC 0KXTTW 00285K 0YTFJC 4.5mm
$10.94
OEM Dell 90W Laptop Charger AC Adapter 19.5V 4.62A 50-60 Hz Latitude, XPS
$8.74
New Original OEM Genuine DELL 65W Small Tip 19.5V AC Charger Power Cord Adapter
$30.60
New OEM 90W AC Adapter Charger For Dell RT74M 0RT74M 0VRJN1 VRJN1 LA90PM111
$20.55