-
Senior Member
Knoppix 8.1 USB-stick installation
Successfully installed release 8.1 on USB stick...works great on my AMD desktop with dual screens, though two minor issues: 1) Screen layout configured with xrandr to my needs - file saved in --->knoppix/.screenlayout with name ScreenLayout.sh. After reboot the system does not boot with this configuration and I have to configure each time I start the computer. 2) Running ->System Settings, ->Workspace Themes ->Cursor Theme I change the mouse cursor to "redglass 48". After reboot the system does not boot with this configuration either and I have to configure the mouse cursor theme each time I start the computer. What do I do wrong? Is there an easy fix which I can do myself?
-
Senior Member
I'm just wondering: Does it make any sense to look at "/etc/X11/xorg.conf" for a solution to the issue? Here are Section Monitor and Section Device:------------ -------------- --------- --
# Monitor section --->auto-generated by KNOPPIX mkxorgconfig Section "Monitor" Identifier "Monitor0" ModelName "Generic Monitor" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors # HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors # VertRefresh 50.0 - 76.0 # Very conservative. May flicker. # VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker. TFT default. Option "MonitorLayout" "LVDS,AUTO" EndSection . . ----------------
# Section "Device" ---> ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # Driver (chipset) autodetect VendorName "All" BoardName "All" # BusID "PCI:1:0:0" # compiz, beryl 3D-Support with DRI & Composite Option "XAANoOffscreenPixmaps" Option "AllowGLXWithComposite" "true" # Some Radeon cards don't handle this well. # Option "EnablePageFlip" "true" Option "TripleBuffer" "true" # Tweaks for the xorg 7.4 (otherwise broken) "intel" driver # Option "Tiling" "no" Option "Legacy3D" "false" # These two lines are (presumably) needed to prevent fonts from being scrambled Option "XaaNoScanlineImageWriteRect" "true" Option "XaaNoScanlineCPUToScreenColorExpandFill" "true" EndSection------------
Last edited by Karibu; 10-08-2017 at 11:22 PM.
-
-
Senior Member
[SOLVED] Knoppix 8.1 USB-stick installation
Thanks for the hint... yes I did and it solved issue #2 - Mouse cursor configuration remains after reboot as desired. For issue #1 - Screen layout - I just change the video cable connections to the PC.
Last edited by Karibu; 10-10-2017 at 06:28 AM.
-
Senior Member
I'm not really happy with the solution though ... ![Confused](images/smilies/confused.png)
because now I have trouble to get the cursor size bigger.
I would like to have redglass 48, which I can choose in System Settings, as default and available after each reboot.
-
/home/knoppix/.config/gtk-3.0/settings.ini ?
-
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
/home/knoppix/.config/gtk-3.0/settings.ini ?
[Settings]
gtk-theme-name=Raleigh
gtk-icon-theme-name=gnome
gtk-font-name=Bitstream Vera Sans 12
gtk-cursor-theme-name=core
gtk-cursor-theme-size=18
gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=1
gtk-enable-input-feedback-sounds=1
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle=hintslight
gtk-xft-rgba=rgb
I'm not sure how to change the cursor theme here?
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
[Session]
window_manager=compiz
disable_autostart=no
polkit/command=lxpolkit
clipboard/command=lxclipboard
xsettings_manager/command=build-in
proxy_manager/command=build-in
keyring/command=ssh-agent
quit_manager/command=lxsession-logout
quit_manager/image=/usr/share/lxde/images/logout-banner.png
quit_manager/layout=top
lock_manager/command=lxlock
terminal_manager/command=lxterminal
launcher_manager/command=lxpanelctl
[GTK]
sNet/ThemeName=Raleigh
sNet/IconThemeName=gnome
sGtk/FontName=Bitstream Vera Sans 12
iGtk/ToolbarStyle=3
iGtk/ButtonImages=1
iGtk/MenuImages=1
sGtk/CursorThemeName=redglass
iGtk/CursorThemeSize=18
iXft/Antialias=1
iXft/Hinting=1
sXft/HintStyle=hintslight
sXft/RGBA=rgb
iNet/EnableEventSounds=1
iNet/EnableInputFeedbackSounds=1
sGtk/ColorScheme=
iGtk/ToolbarIconSize=3
[Mouse]
AccFactor=20
AccThreshold=10
LeftHanded=0
[Keyboard]
Delay=500
Interval=30
Beep=1
[State]
guess_default=true
[Dbus]
lxde=true
[Environment]
menu_prefix=lxde-
I'm confused...![Confused](images/smilies/confused.png)
here redglass shows up ( size 18 though). Which of the config files is responsible when booting?
-
Senior Member
Eureka! It works....It's ....LXDE/dektop.conf ![Very Happy](images/smilies/icon_biggrin.gif)
Thank you philo, I changed line
to
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture](/store/img/g/fxsAAOSwZD5l6PSG/s-l225/1U-BareMetal-pfsense-opnsense-Router-Firewall-DNS-.jpg)
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
![Super micro Server picture](/store/img/g/PNgAAOSweU1mSkvR/s-l225/Super-micro-Server.jpg)
Super micro Server
$168.00
![Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD picture](/store/img/g/aYkAAOSwLGpmYf9P/s-l225/Supermicro-1U-Server-X9SRI-F-Xeon-E5-2640-v2-2-5Gh.jpg)
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
![HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested, picture](/store/img/g/WmMAAOSwo-9mcFYr/s-l225/HP-Proliant-MicroServer-Model-HSTNS-5151-NO-HARD-D.jpg)
HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested,
$99.99
![SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture](/store/img/g/MFoAAOSwQYhmavYc/s-l225/SuperMicro-Server-505-2-Intel-Atom-2-4GHz-8GB-RAM-.jpg)
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
![HP ProLiant MicroServer Gen10 Plus - 16GB RAM No HDD picture](/store/img/g/RbwAAOSwgolmefdq/s-l225/HP-ProLiant-MicroServer-Gen10-Plus-16GB-RAM-No-HDD.jpg)
HP ProLiant MicroServer Gen10 Plus - 16GB RAM No HDD
$500.00
![SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears picture](/store/img/g/aUIAAOSwlmVmVlh9/s-l225/SuperMicro-SuperServer-5018A-FTN4-505-2-Intel-Atom.jpg)
SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears
$174.99
![Supermicro, 1U Server Intel, Unraid Server 2x 8CORE E5-2650V2 2.6GHz 32GB RAM picture](/store/img/g/nykAAOSw1ztmbwRe/s-l225/Supermicro-1U-Server-Intel-Unraid-Server-2x-8CORE-.jpg)
Supermicro, 1U Server Intel, Unraid Server 2x 8CORE E5-2650V2 2.6GHz 32GB RAM
$350.00
![HPE ProLiant v2 Ultra Micro Tower Server Pentium Gold G6405 16GB RAM P69102005 picture](/store/img/g/2EUAAOSwLr5l1g27/s-l225/HPE-ProLiant-v2-Ultra-Micro-Tower-Server-Pentium-G.jpg)
HPE ProLiant v2 Ultra Micro Tower Server Pentium Gold G6405 16GB RAM P69102005
$696.73