-
Senior Member
Knoppix 8.1 USB-stick installation
Successfully installed release 8.1 on USB stick...works great on my AMD desktop with dual screens, though two minor issues: 1) Screen layout configured with xrandr to my needs - file saved in --->knoppix/.screenlayout with name ScreenLayout.sh. After reboot the system does not boot with this configuration and I have to configure each time I start the computer. 2) Running ->System Settings, ->Workspace Themes ->Cursor Theme I change the mouse cursor to "redglass 48". After reboot the system does not boot with this configuration either and I have to configure the mouse cursor theme each time I start the computer. What do I do wrong? Is there an easy fix which I can do myself?
-
Senior Member
I'm just wondering: Does it make any sense to look at "/etc/X11/xorg.conf" for a solution to the issue? Here are Section Monitor and Section Device:------------ -------------- --------- --
# Monitor section --->auto-generated by KNOPPIX mkxorgconfig Section "Monitor" Identifier "Monitor0" ModelName "Generic Monitor" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors # HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors # VertRefresh 50.0 - 76.0 # Very conservative. May flicker. # VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker. TFT default. Option "MonitorLayout" "LVDS,AUTO" EndSection . . ----------------
# Section "Device" ---> ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # Driver (chipset) autodetect VendorName "All" BoardName "All" # BusID "PCI:1:0:0" # compiz, beryl 3D-Support with DRI & Composite Option "XAANoOffscreenPixmaps" Option "AllowGLXWithComposite" "true" # Some Radeon cards don't handle this well. # Option "EnablePageFlip" "true" Option "TripleBuffer" "true" # Tweaks for the xorg 7.4 (otherwise broken) "intel" driver # Option "Tiling" "no" Option "Legacy3D" "false" # These two lines are (presumably) needed to prevent fonts from being scrambled Option "XaaNoScanlineImageWriteRect" "true" Option "XaaNoScanlineCPUToScreenColorExpandFill" "true" EndSection------------
Last edited by Karibu; 10-08-2017 at 11:22 PM.
-
-
Senior Member
[SOLVED] Knoppix 8.1 USB-stick installation
Thanks for the hint... yes I did and it solved issue #2 - Mouse cursor configuration remains after reboot as desired. For issue #1 - Screen layout - I just change the video cable connections to the PC.
Last edited by Karibu; 10-10-2017 at 06:28 AM.
-
Senior Member
I'm not really happy with the solution though ... ![Confused](images/smilies/confused.png)
because now I have trouble to get the cursor size bigger.
I would like to have redglass 48, which I can choose in System Settings, as default and available after each reboot.
-
/home/knoppix/.config/gtk-3.0/settings.ini ?
-
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
/home/knoppix/.config/gtk-3.0/settings.ini ?
[Settings]
gtk-theme-name=Raleigh
gtk-icon-theme-name=gnome
gtk-font-name=Bitstream Vera Sans 12
gtk-cursor-theme-name=core
gtk-cursor-theme-size=18
gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=1
gtk-enable-input-feedback-sounds=1
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle=hintslight
gtk-xft-rgba=rgb
I'm not sure how to change the cursor theme here?
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
[Session]
window_manager=compiz
disable_autostart=no
polkit/command=lxpolkit
clipboard/command=lxclipboard
xsettings_manager/command=build-in
proxy_manager/command=build-in
keyring/command=ssh-agent
quit_manager/command=lxsession-logout
quit_manager/image=/usr/share/lxde/images/logout-banner.png
quit_manager/layout=top
lock_manager/command=lxlock
terminal_manager/command=lxterminal
launcher_manager/command=lxpanelctl
[GTK]
sNet/ThemeName=Raleigh
sNet/IconThemeName=gnome
sGtk/FontName=Bitstream Vera Sans 12
iGtk/ToolbarStyle=3
iGtk/ButtonImages=1
iGtk/MenuImages=1
sGtk/CursorThemeName=redglass
iGtk/CursorThemeSize=18
iXft/Antialias=1
iXft/Hinting=1
sXft/HintStyle=hintslight
sXft/RGBA=rgb
iNet/EnableEventSounds=1
iNet/EnableInputFeedbackSounds=1
sGtk/ColorScheme=
iGtk/ToolbarIconSize=3
[Mouse]
AccFactor=20
AccThreshold=10
LeftHanded=0
[Keyboard]
Delay=500
Interval=30
Beep=1
[State]
guess_default=true
[Dbus]
lxde=true
[Environment]
menu_prefix=lxde-
I'm confused...![Confused](images/smilies/confused.png)
here redglass shows up ( size 18 though). Which of the config files is responsible when booting?
-
Senior Member
Eureka! It works....It's ....LXDE/dektop.conf ![Very Happy](images/smilies/icon_biggrin.gif)
Thank you philo, I changed line
to
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture](/store/img/g/W38AAOSwtcVjVC0Z/s-l225/Dell-PowerEdge-R730-2x-E5-2699V3-2-3Ghz-36-Core-12.jpg)
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
![Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture](/store/img/g/vx0AAOSwvwFlExVY/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2680-V4-28-Cores-.jpg)
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB picture](/store/img/g/7XkAAOSwnhFkFNvU/s-l225/Dell-Poweredge-R630-2x-Xeon-E5-2680-v4-2-4ghz-28-C.jpg)
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![DELL POWEREDGE R630 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU picture](/store/img/g/mkkAAOSwE5ZmT1Cg/s-l225/DELL-POWEREDGE-R630-8-x-2-5-2X-E5-2680V4-32GB-RAM-.jpg)
DELL POWEREDGE R630 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$184.95
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
![HP PROLIANT DL380 GEN9 719064-B21 INTEL XEON E5-2640 V4 2.4GHz 128GB SEE NOTES picture](/store/img/g/ESYAAOSwtRhmafu0/s-l225/HP-PROLIANT-DL380-GEN9-719064-B21-INTEL-XEON-E5-26.jpg)
HP PROLIANT DL380 GEN9 719064-B21 INTEL XEON E5-2640 V4 2.4GHz 128GB SEE NOTES
$150.00
![Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture](/store/img/g/CdkAAOSwY0BmYMoF/s-l225/Dell-Poweredge-R730xd-LFF-14-Bay-2U-Server-Choose-.jpg)
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
![1U Server ( 4x VM's ) Hosting VPS Short Depth 20](/store/img/g/mY0AAOSwFDNhGq7d/s-l225/1U-Server-4x-VM-s-Hosting-VPS-Short-Depth-20-1U-Xe.jpg)
1U Server ( 4x VM's ) Hosting VPS Short Depth 20" 1U Xeon 3.5Ghz 16GB X10SLM-F
$149.00