-
Senior Member
Knoppix 8.1 USB-stick installation
Successfully installed release 8.1 on USB stick...works great on my AMD desktop with dual screens, though two minor issues: 1) Screen layout configured with xrandr to my needs - file saved in --->knoppix/.screenlayout with name ScreenLayout.sh. After reboot the system does not boot with this configuration and I have to configure each time I start the computer. 2) Running ->System Settings, ->Workspace Themes ->Cursor Theme I change the mouse cursor to "redglass 48". After reboot the system does not boot with this configuration either and I have to configure the mouse cursor theme each time I start the computer. What do I do wrong? Is there an easy fix which I can do myself?
-
Senior Member
I'm just wondering: Does it make any sense to look at "/etc/X11/xorg.conf" for a solution to the issue? Here are Section Monitor and Section Device:------------ -------------- --------- --
# Monitor section --->auto-generated by KNOPPIX mkxorgconfig Section "Monitor" Identifier "Monitor0" ModelName "Generic Monitor" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors # HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors # VertRefresh 50.0 - 76.0 # Very conservative. May flicker. # VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker. TFT default. Option "MonitorLayout" "LVDS,AUTO" EndSection . . ----------------
# Section "Device" ---> ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # Driver (chipset) autodetect VendorName "All" BoardName "All" # BusID "PCI:1:0:0" # compiz, beryl 3D-Support with DRI & Composite Option "XAANoOffscreenPixmaps" Option "AllowGLXWithComposite" "true" # Some Radeon cards don't handle this well. # Option "EnablePageFlip" "true" Option "TripleBuffer" "true" # Tweaks for the xorg 7.4 (otherwise broken) "intel" driver # Option "Tiling" "no" Option "Legacy3D" "false" # These two lines are (presumably) needed to prevent fonts from being scrambled Option "XaaNoScanlineImageWriteRect" "true" Option "XaaNoScanlineCPUToScreenColorExpandFill" "true" EndSection------------
Last edited by Karibu; 10-08-2017 at 11:22 PM.
-
-
Senior Member
[SOLVED] Knoppix 8.1 USB-stick installation
Thanks for the hint... yes I did and it solved issue #2 - Mouse cursor configuration remains after reboot as desired. For issue #1 - Screen layout - I just change the video cable connections to the PC.
Last edited by Karibu; 10-10-2017 at 06:28 AM.
-
Senior Member
I'm not really happy with the solution though ... ![Confused](images/smilies/confused.png)
because now I have trouble to get the cursor size bigger.
I would like to have redglass 48, which I can choose in System Settings, as default and available after each reboot.
-
/home/knoppix/.config/gtk-3.0/settings.ini ?
-
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
/home/knoppix/.config/gtk-3.0/settings.ini ?
[Settings]
gtk-theme-name=Raleigh
gtk-icon-theme-name=gnome
gtk-font-name=Bitstream Vera Sans 12
gtk-cursor-theme-name=core
gtk-cursor-theme-size=18
gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=1
gtk-enable-input-feedback-sounds=1
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle=hintslight
gtk-xft-rgba=rgb
I'm not sure how to change the cursor theme here?
-
Senior Member
![Quote](images/misc/quote_icon.png)
Originally Posted by
philo
or:
/home/knoppix/.config/lxsession/LXDE/desktop.conf
[Session]
window_manager=compiz
disable_autostart=no
polkit/command=lxpolkit
clipboard/command=lxclipboard
xsettings_manager/command=build-in
proxy_manager/command=build-in
keyring/command=ssh-agent
quit_manager/command=lxsession-logout
quit_manager/image=/usr/share/lxde/images/logout-banner.png
quit_manager/layout=top
lock_manager/command=lxlock
terminal_manager/command=lxterminal
launcher_manager/command=lxpanelctl
[GTK]
sNet/ThemeName=Raleigh
sNet/IconThemeName=gnome
sGtk/FontName=Bitstream Vera Sans 12
iGtk/ToolbarStyle=3
iGtk/ButtonImages=1
iGtk/MenuImages=1
sGtk/CursorThemeName=redglass
iGtk/CursorThemeSize=18
iXft/Antialias=1
iXft/Hinting=1
sXft/HintStyle=hintslight
sXft/RGBA=rgb
iNet/EnableEventSounds=1
iNet/EnableInputFeedbackSounds=1
sGtk/ColorScheme=
iGtk/ToolbarIconSize=3
[Mouse]
AccFactor=20
AccThreshold=10
LeftHanded=0
[Keyboard]
Delay=500
Interval=30
Beep=1
[State]
guess_default=true
[Dbus]
lxde=true
[Environment]
menu_prefix=lxde-
I'm confused...![Confused](images/smilies/confused.png)
here redglass shows up ( size 18 though). Which of the config files is responsible when booting?
-
Senior Member
Eureka! It works....It's ....LXDE/dektop.conf ![Very Happy](images/smilies/icon_biggrin.gif)
Thank you philo, I changed line
to
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD picture](/store/img/g/kBAAAOSwEVVlpuCW/s-l225/SUPERMICRO-CSE-512-AMD-Opteron-Processor-6128-32GB.jpg)
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
![HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD picture](/store/img/g/EF8AAOSwQeFmKrpJ/s-l225/HPE-ProLiant-MicroServer-Gen8-Intel-Xeon-E3-1265L-.jpg)
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
![HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES picture](/store/img/g/zYEAAOSwnM1mHpAn/s-l225/HP-ProLiant-Xeon-E3-1220L-V2-MicroServer-Gen8-2-30.jpg)
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
![HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture](/store/img/g/eHkAAOSwVbBmJhq0/s-l225/HPE-ProLiant-MicroServer-Gen10-Plus-v2-Ultra-Micro.jpg)
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
![SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture](/store/img/g/RK8AAOSwJZpmAans/s-l225/SuperMicro-Server-505-2-Intel-Atom-2-4GHz-8GB-RAM-.jpg)
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
![HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture](/store/img/g/yFcAAOSwBA5l~d7o/s-l225/HP-ProLiant-HSTNS-5151-Micro-Server-8GB-RAM-No-Dri.jpg)
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
![Supermicro 5018A-FTN4 Rack Server - Black picture](/store/img/g/cR8AAOSwlrJlelCB/s-l225/Supermicro-5018A-FTN4-Rack-Server-Black.jpg)
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
![Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001 picture](/store/img/g/FykAAOSwCyhkNHnI/s-l225/Microsel-Server-Tower-Supermicro-X10SAE-E3-1275-V3.jpg)
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
![1U 20](/store/img/g/Id0AAOSwjeBkikov/s-l225/1U-20-Short-Depth-Server-Firewall-PFSense-X11SSH-F.jpg)
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00