modprobe ne io=0x300 irq=11
Should work...
I have an old ISA NE2000 compatible nic that isn't detected at startup. How can I:
o alias eth0 to the ne module
o specify irq=11 and io=0x300 options for the ne module
o load the module
Thanks...
modprobe ne io=0x300 irq=11
Should work...
... and it did work. Thanks.Originally Posted by stonent
(I feel a littleas I should have known that)
That's ok, I had to refresh the memory myself.![]()
Originally Posted by stonent
Hi,
Forgive me, but Im new to Linux. Where would you enter/place this? At a cmdline once inside Knoppix, or is there a file it can be saved to? (for automated CD boot).
Thanks
Brad
Originally Posted by scissors
Nevermind... figured it out.
http://www.knoppix.net/forum/viewtop...asc&highlight=
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$346.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R730xd 3.5 2x E5-2666 v3 2.9ghz 128gb H730 14x Trays 2x 1100w
$519.99
Dell PowerEdge T620 8-Bay LFF Xeon E5-2660 0 2.20GHz 48GB NO HDD S110 Server
$174.99
Dell PowerEdge R420 2 2.5 6C,16GB,8TB,RAID5,IDRAC7 ENT,2PSU
$150.00
Dell Poweredge R420 3.5" 2x Xeon E5-2430 2.2ghz 12-Cores 24gb 2x 1TB 2x 550w
$169.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$296.00
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$249.00