Do not type any command. What happens?
I have Knoppix 8.1 from the Linux Magazine. When I boot from the DVD I can see Knoppix Welcome screen. When I give the command knoppix64 in the boot prompt Knoppix begins to scan my harddrives but do not find ”itself” in the cd-slot and then stops.
My computer has an ordinary Bios not UEFI.
I managed to solve that problem. I wrote knoppix64 /dev/sr0 in the command prompt.
But this is the problem I hope someone can help me with:
I installed Knoppix using the install function in Knoppix to a flashdisk with a persistence partition. Now I have the same problem as above. It scans the drives but cannot find the usb-stick.
Gparted in Knoppix tells me the usb-drive is sdg with two partitions /dev/sdg1 and /dev/sdg2 for the persistence partition.
No boot with the command ”Knoppix64 /dev/sdg1”
What command should I use?
Is this a bug or not? In my opinion yes.
Do not type any command. What happens?
Without any commands the same. Begins scanning my drives:
Searching for Knoppix 8.1 in: /dev/"scanning my harddisks drives" and then nothing.
Same thing on my second computer with an ordinary old Bios.
For comparision another bootable USB-stick ( TAILS ) boots directly with the same boot order in Bios.
On another computer, a laptop with UEFI, Knoppix boots when secure boot is off and legacy boot enabled.
Download a fresh iso from one of the knoppix mirrors , checksum, burn it and use it for a fresh installation.
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP, 1310nm, 2km, LC, MMF
$83.99
Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile
$19.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module
$6.80