Results 1 to 4 of 4

Thread: Knoppix 8.1 don’t find its boot media

  1. #1
    Junior Member
    Join Date
    Mar 2005
    Posts
    6

    Knoppix 8.1 don’t find its boot media

    I have Knoppix 8.1 from the Linux Magazine. When I boot from the DVD I can see Knoppix Welcome screen. When I give the command knoppix64 in the boot prompt Knoppix begins to scan my harddrives but do not find ”itself” in the cd-slot and then stops.
    My computer has an ordinary Bios not UEFI.
    I managed to solve that problem. I wrote knoppix64 /dev/sr0 in the command prompt.


    But this is the problem I hope someone can help me with:


    I installed Knoppix using the install function in Knoppix to a flashdisk with a persistence partition. Now I have the same problem as above. It scans the drives but cannot find the usb-stick.


    Gparted in Knoppix tells me the usb-drive is sdg with two partitions /dev/sdg1 and /dev/sdg2 for the persistence partition.


    No boot with the command ”Knoppix64 /dev/sdg1”

    What command should I use?



    Is this a bug or not? In my opinion yes.

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Do not type any command. What happens?

  3. #3
    Junior Member
    Join Date
    Mar 2005
    Posts
    6
    Without any commands the same. Begins scanning my drives:

    Searching for Knoppix 8.1 in: /dev/"scanning my harddisks drives" and then nothing.

    Same thing on my second computer with an ordinary old Bios.

    For comparision another bootable USB-stick ( TAILS ) boots directly with the same boot order in Bios.

    On another computer, a laptop with UEFI, Knoppix boots when secure boot is off and legacy boot enabled.

  4. #4
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Download a fresh iso from one of the knoppix mirrors , checksum, burn it and use it for a fresh installation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45 picture

For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45

$170.99



NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping*

$18.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.90



Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478  picture

Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478

$24.99



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module picture

Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module

$6.98



Cisco GLC-T 1000Base-T SFP Transceiver Module RJ-45  picture

Cisco GLC-T 1000Base-T SFP Transceiver Module RJ-45

$24.99



10GBase-T SFP+ to RJ45 Copper Transceiver SFP Module for Cisco SFP-10G-T-S 10Gb picture

10GBase-T SFP+ to RJ45 Copper Transceiver SFP Module for Cisco SFP-10G-T-S 10Gb

$55.99



HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC picture

HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC

$65.00



For MikroTik S-RJ01 SFP transceiver RJ45 to SFP 1000Base-T Cooper SFP 100m picture

For MikroTik S-RJ01 SFP transceiver RJ45 to SFP 1000Base-T Cooper SFP 100m

$16.99