Do not type any command. What happens?
I have Knoppix 8.1 from the Linux Magazine. When I boot from the DVD I can see Knoppix Welcome screen. When I give the command knoppix64 in the boot prompt Knoppix begins to scan my harddrives but do not find ”itself” in the cd-slot and then stops.
My computer has an ordinary Bios not UEFI.
I managed to solve that problem. I wrote knoppix64 /dev/sr0 in the command prompt.
But this is the problem I hope someone can help me with:
I installed Knoppix using the install function in Knoppix to a flashdisk with a persistence partition. Now I have the same problem as above. It scans the drives but cannot find the usb-stick.
Gparted in Knoppix tells me the usb-drive is sdg with two partitions /dev/sdg1 and /dev/sdg2 for the persistence partition.
No boot with the command ”Knoppix64 /dev/sdg1”
What command should I use?
Is this a bug or not? In my opinion yes.
Do not type any command. What happens?
Without any commands the same. Begins scanning my drives:
Searching for Knoppix 8.1 in: /dev/"scanning my harddisks drives" and then nothing.
Same thing on my second computer with an ordinary old Bios.
For comparision another bootable USB-stick ( TAILS ) boots directly with the same boot order in Bios.
On another computer, a laptop with UEFI, Knoppix boots when secure boot is off and legacy boot enabled.
Download a fresh iso from one of the knoppix mirrors , checksum, burn it and use it for a fresh installation.
Juniper PD-4OC192-SON-XFP 710-013264 Four line-rate OC-192c/ STM-64 IPUIA01MTA
$600.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.12
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
JUNIPER EX3300-48T 48 PORT SWITCH TESTED & RESET w/ Rack Ears
$49.99
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00