Results 1 to 4 of 4

Thread: Knoppix 8.1 don’t find its boot media

  1. #1
    Junior Member
    Join Date
    Mar 2005
    Posts
    6

    Knoppix 8.1 don’t find its boot media

    I have Knoppix 8.1 from the Linux Magazine. When I boot from the DVD I can see Knoppix Welcome screen. When I give the command knoppix64 in the boot prompt Knoppix begins to scan my harddrives but do not find ”itself” in the cd-slot and then stops.
    My computer has an ordinary Bios not UEFI.
    I managed to solve that problem. I wrote knoppix64 /dev/sr0 in the command prompt.


    But this is the problem I hope someone can help me with:


    I installed Knoppix using the install function in Knoppix to a flashdisk with a persistence partition. Now I have the same problem as above. It scans the drives but cannot find the usb-stick.


    Gparted in Knoppix tells me the usb-drive is sdg with two partitions /dev/sdg1 and /dev/sdg2 for the persistence partition.


    No boot with the command ”Knoppix64 /dev/sdg1”

    What command should I use?



    Is this a bug or not? In my opinion yes.

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Do not type any command. What happens?

  3. #3
    Junior Member
    Join Date
    Mar 2005
    Posts
    6
    Without any commands the same. Begins scanning my drives:

    Searching for Knoppix 8.1 in: /dev/"scanning my harddisks drives" and then nothing.

    Same thing on my second computer with an ordinary old Bios.

    For comparision another bootable USB-stick ( TAILS ) boots directly with the same boot order in Bios.

    On another computer, a laptop with UEFI, Knoppix boots when secure boot is off and legacy boot enabled.

  4. #4
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Download a fresh iso from one of the knoppix mirrors , checksum, burn it and use it for a fresh installation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC picture

Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC

$1899.00



*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module picture

*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module

$749.00



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper 48-Port PoE GbE Network Switch  w/ Dual Power Supplies F B EX4300-48P picture

Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P

$178.99



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED picture

Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED

$749.95



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$74.95



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$41.94