Do not type any command. What happens?
I have Knoppix 8.1 from the Linux Magazine. When I boot from the DVD I can see Knoppix Welcome screen. When I give the command knoppix64 in the boot prompt Knoppix begins to scan my harddrives but do not find ”itself” in the cd-slot and then stops.
My computer has an ordinary Bios not UEFI.
I managed to solve that problem. I wrote knoppix64 /dev/sr0 in the command prompt.
But this is the problem I hope someone can help me with:
I installed Knoppix using the install function in Knoppix to a flashdisk with a persistence partition. Now I have the same problem as above. It scans the drives but cannot find the usb-stick.
Gparted in Knoppix tells me the usb-drive is sdg with two partitions /dev/sdg1 and /dev/sdg2 for the persistence partition.
No boot with the command ”Knoppix64 /dev/sdg1”
What command should I use?
Is this a bug or not? In my opinion yes.
Do not type any command. What happens?
Without any commands the same. Begins scanning my drives:
Searching for Knoppix 8.1 in: /dev/"scanning my harddisks drives" and then nothing.
Same thing on my second computer with an ordinary old Bios.
For comparision another bootable USB-stick ( TAILS ) boots directly with the same boot order in Bios.
On another computer, a laptop with UEFI, Knoppix boots when secure boot is off and legacy boot enabled.
Download a fresh iso from one of the knoppix mirrors , checksum, burn it and use it for a fresh installation.
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile
$19.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00