Hello,
I'm booting a board with 7.7.1
This board has 3 DVI display ports, one of them is converted to VGA by hardware.
The board has only one graphic card.
After booting, I can see few boot messages on the VGA output and then, the screen is black.
The display probably goes to another port.
How can I specify the required port in knoppix ?
Thank you,
Zvika
DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45
$387.00
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge R210 Server X3450 2.67GHz 8GB RAM - NO HDDs
$59.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$461.00
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$299.99