Results 1 to 2 of 2

Thread: 7.2.0 stored video config across boots earlier, now doesn't

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Smile 7.2.0 stored video config across boots earlier, now doesn't

    My Desktop Knoppix has to configure the system for Samsung SyncMaster 1360X768. Used Nvidia for x86 version 304.125 to set my monitor way back. It remained set that way.

    Recently, I thought that I should use my AMD's 64-bit operation rather than the Intel's 32bit. I downloaded the corresponding driver for x86-64. But doesn't get installed. Perhaps because Knoppix only addresses x86-64bit for intel processors. I had forgotten that it doesn't address the AMD processors.

    But because of this fiddling with my system, another problem crept up. To use the monitor I have to reinstall the driver upon every boot. Knoppix overwrites the drivers as well, not only the xorg.conf, upon subsequent boots and falls back on partial screen default even with vga=792 cheatcode.

    There is a line in /etc/X11/xorg.conf :
    # Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite your /etc/X11/xorg.conf
    It is also written that:
    # Monitor section auto-generated by KNOPPIX mlxprgconfig
    I have deleted the lines from xorg.conf but knoppix still overwrites the nvidia setup files. I had followed some other steps during the first set up, but did not write it down. So I can't use them now. I also searched the knoppix forum, but similar threads don't come to my notice.

    I have kept a back-up of my xorg.conf file as xorg.conf.rajiabando . When the full screen didn't activate during the subsequent boots, I have at init 3, used pico and copied the back-up as xorg.conf, but this simple task doesn't help. Knoppix is also overwriting some of the nvidia files.

    Why didn't it do so earlier, because of which I continued to have my full screen displays across all the subsequent boots?
    Why it isn't returning the full screens now?

    These are the questions upon which I am tearing my hair. [Don't worry, I can't, because I regularly have my hair cropped with my shaver ]

    Generally, I have notes of all my systems settings with me. This omission appears to be one of those idiotic decisions I have taken without thinking properly.

    Could I please be helped?
    Last edited by rajibando; 03-09-2018 at 07:19 AM. Reason: clarity, typo

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Some addition

    I failed to write that I have searched using:
    Code:
    sudo whereis mlxprgconfig
    Output:
    Code:
     mlxprgconfig:
    i.e., no existence.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


TRUENAS READY SERVER HP Proliant MicroServer Gen8, Xeon E3 2.30GHz 4 HDD SLOTS picture

TRUENAS READY SERVER HP Proliant MicroServer Gen8, Xeon E3 2.30GHz 4 HDD SLOTS

$389.99



HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅ picture

HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅

$89.99



HPE HP iLO2 3 4 Advanced Key Lifetime License Microserver ProLiant Server Gen789 picture

HPE HP iLO2 3 4 Advanced Key Lifetime License Microserver ProLiant Server Gen789

$6.90



HP Proliant MicroServer Gen8;  8GB RAM NO HDD picture

HP Proliant MicroServer Gen8;  8GB RAM NO HDD

$250.00



HPE ProLiant MicroServer Gen10 AMD Opteron X3216 8GB RAM No HDDs picture

HPE ProLiant MicroServer Gen10 AMD Opteron X3216 8GB RAM No HDDs

$550.00



HPE ProLiant Gen 8 2.3 GHz Intel Xeon E3-1220L v2 8 GB RAM 2 TB HDD Micro Server picture

HPE ProLiant Gen 8 2.3 GHz Intel Xeon E3-1220L v2 8 GB RAM 2 TB HDD Micro Server

$379.99



HPE ProLiant MicroServer Gen10 Plus Ultra Micro Tower Server - 1 x Intel Pentium picture

HPE ProLiant MicroServer Gen10 Plus Ultra Micro Tower Server - 1 x Intel Pentium

$844.42



Super Micro Computer Superserver 5015M-T/MT/MT+ picture

Super Micro Computer Superserver 5015M-T/MT/MT+

$129.95



Used Super Micro X8DT6 EMC Isilon NL400 System Motherboard No RAM, CPU, Cables picture

Used Super Micro X8DT6 EMC Isilon NL400 System Motherboard No RAM, CPU, Cables

$100.99



HPE MicroServer Gen10 Plus iLO Enablement Kit for HPE MicroServer Gen10 Plus picture

HPE MicroServer Gen10 Plus iLO Enablement Kit for HPE MicroServer Gen10 Plus

$88.04