Results 1 to 2 of 2

Thread: 7.2.0 stored video config across boots earlier, now doesn't

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Smile 7.2.0 stored video config across boots earlier, now doesn't

    My Desktop Knoppix has to configure the system for Samsung SyncMaster 1360X768. Used Nvidia for x86 version 304.125 to set my monitor way back. It remained set that way.

    Recently, I thought that I should use my AMD's 64-bit operation rather than the Intel's 32bit. I downloaded the corresponding driver for x86-64. But doesn't get installed. Perhaps because Knoppix only addresses x86-64bit for intel processors. I had forgotten that it doesn't address the AMD processors.

    But because of this fiddling with my system, another problem crept up. To use the monitor I have to reinstall the driver upon every boot. Knoppix overwrites the drivers as well, not only the xorg.conf, upon subsequent boots and falls back on partial screen default even with vga=792 cheatcode.

    There is a line in /etc/X11/xorg.conf :
    # Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite your /etc/X11/xorg.conf
    It is also written that:
    # Monitor section auto-generated by KNOPPIX mlxprgconfig
    I have deleted the lines from xorg.conf but knoppix still overwrites the nvidia setup files. I had followed some other steps during the first set up, but did not write it down. So I can't use them now. I also searched the knoppix forum, but similar threads don't come to my notice.

    I have kept a back-up of my xorg.conf file as xorg.conf.rajiabando . When the full screen didn't activate during the subsequent boots, I have at init 3, used pico and copied the back-up as xorg.conf, but this simple task doesn't help. Knoppix is also overwriting some of the nvidia files.

    Why didn't it do so earlier, because of which I continued to have my full screen displays across all the subsequent boots?
    Why it isn't returning the full screens now?

    These are the questions upon which I am tearing my hair. [Don't worry, I can't, because I regularly have my hair cropped with my shaver ]

    Generally, I have notes of all my systems settings with me. This omission appears to be one of those idiotic decisions I have taken without thinking properly.

    Could I please be helped?
    Last edited by rajibando; 03-09-2018 at 07:19 AM. Reason: clarity, typo

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Some addition

    I failed to write that I have searched using:
    Code:
    sudo whereis mlxprgconfig
    Output:
    Code:
     mlxprgconfig:
    i.e., no existence.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01 picture

SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01

$109.99



CISCO 5108 Blade Server Chassis N20-C6508 picture

CISCO 5108 Blade Server Chassis N20-C6508

$200.00



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives picture

HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives

$59.98



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



HP ProLiant BL460c Server Blade (2 x  CPU) 24GB RAM/No Drives  picture

HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives

$45.60



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model picture

Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model

$349.00



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99