I failed to write that I have searched using:Output:Code:sudo whereis mlxprgconfigi.e., no existence.Code:mlxprgconfig:
My Desktop Knoppix has to configure the system for Samsung SyncMaster 1360X768. Used Nvidia for x86 version 304.125 to set my monitor way back. It remained set that way.
Recently, I thought that I should use my AMD's 64-bit operation rather than the Intel's 32bit. I downloaded the corresponding driver for x86-64. But doesn't get installed. Perhaps because Knoppix only addresses x86-64bit for intel processors. I had forgotten that it doesn't address the AMD processors.
But because of this fiddling with my system, another problem crept up. To use the monitor I have to reinstall the driver upon every boot. Knoppix overwrites the drivers as well, not only the xorg.conf, upon subsequent boots and falls back on partial screen default even with vga=792 cheatcode.
There is a line in /etc/X11/xorg.conf :It is also written that:# Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite your /etc/X11/xorg.conf
I have deleted the lines from xorg.conf but knoppix still overwrites the nvidia setup files. I had followed some other steps during the first set up, but did not write it down. So I can't use them now. I also searched the knoppix forum, but similar threads don't come to my notice.# Monitor section auto-generated by KNOPPIX mlxprgconfig
I have kept a back-up of my xorg.conf file as xorg.conf.rajiabando . When the full screen didn't activate during the subsequent boots, I have at init 3, used pico and copied the back-up as xorg.conf, but this simple task doesn't help. Knoppix is also overwriting some of the nvidia files.
Why didn't it do so earlier, because of which I continued to have my full screen displays across all the subsequent boots?
Why it isn't returning the full screens now?
These are the questions upon which I am tearing my hair. [Don't worry, I can't, because I regularly have my hair cropped with my shaver]
Generally, I have notes of all my systems settings with me. This omission appears to be one of those idiotic decisions I have taken without thinking properly.
Could I please be helped?
Last edited by rajibando; 03-09-2018 at 07:19 AM. Reason: clarity, typo
I failed to write that I have searched using:Output:Code:sudo whereis mlxprgconfigi.e., no existence.Code:mlxprgconfig:
2U 12 Bay Supermicro 6028U-TR4T+ w/ X10DRU-i+ Wholesale Custom Build Your Server
$300.99
Dell PowerEdge R630 Server 2x E5-2650 v4 2.80GHz 128GB DDR4 RAM
$142.49
Dell Poweredge R730 2x Xeon E5-2670 v3 2.3ghz 24-Cores 32gb H730 iDracEnt
$174.99
Supermicro 2U 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server
$270.99
Dell PowerEdge R630 Server 2x E5-2697v3 2.60Ghz 28-Core 128GB H730P Rails
$295.00
HP ProLiant MicroServer Gen8 Server 12gb RAM I3-3240 NO HDD/OS
$174.99
Dell PowerEdge R720 Server w 8 Trays 128Gb 80Gb SSD/2x4Tb 2x8c CPUs Proxmox
$340.00
Dell Poweredge R730xd 26-Bay SFF | 2x E5-2690 v3 2.6ghz 24-Cores | 64GB | Trays
$279.99
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32 Cores- 128 GB Ram - 600 GB
$229.00
HP ProLiant DL380 Gen10 8SFF Server - Intel Xeon Gold 6142 - 32 Cores- 128GB Ram
$499.00