Results 1 to 2 of 2

Thread: 7.2.0 stored video config across boots earlier, now doesn't

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Smile 7.2.0 stored video config across boots earlier, now doesn't

    My Desktop Knoppix has to configure the system for Samsung SyncMaster 1360X768. Used Nvidia for x86 version 304.125 to set my monitor way back. It remained set that way.

    Recently, I thought that I should use my AMD's 64-bit operation rather than the Intel's 32bit. I downloaded the corresponding driver for x86-64. But doesn't get installed. Perhaps because Knoppix only addresses x86-64bit for intel processors. I had forgotten that it doesn't address the AMD processors.

    But because of this fiddling with my system, another problem crept up. To use the monitor I have to reinstall the driver upon every boot. Knoppix overwrites the drivers as well, not only the xorg.conf, upon subsequent boots and falls back on partial screen default even with vga=792 cheatcode.

    There is a line in /etc/X11/xorg.conf :
    # Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite your /etc/X11/xorg.conf
    It is also written that:
    # Monitor section auto-generated by KNOPPIX mlxprgconfig
    I have deleted the lines from xorg.conf but knoppix still overwrites the nvidia setup files. I had followed some other steps during the first set up, but did not write it down. So I can't use them now. I also searched the knoppix forum, but similar threads don't come to my notice.

    I have kept a back-up of my xorg.conf file as xorg.conf.rajiabando . When the full screen didn't activate during the subsequent boots, I have at init 3, used pico and copied the back-up as xorg.conf, but this simple task doesn't help. Knoppix is also overwriting some of the nvidia files.

    Why didn't it do so earlier, because of which I continued to have my full screen displays across all the subsequent boots?
    Why it isn't returning the full screens now?

    These are the questions upon which I am tearing my hair. [Don't worry, I can't, because I regularly have my hair cropped with my shaver ]

    Generally, I have notes of all my systems settings with me. This omission appears to be one of those idiotic decisions I have taken without thinking properly.

    Could I please be helped?
    Last edited by rajibando; 03-09-2018 at 07:19 AM. Reason: clarity, typo

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Some addition

    I failed to write that I have searched using:
    Code:
    sudo whereis mlxprgconfig
    Output:
    Code:
     mlxprgconfig:
    i.e., no existence.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


A pair 10G SFP+ Bidi Transceivers SMF 20km for Cisco SFP-10G-BXD-I/SFP-10G-BXU-I picture

A pair 10G SFP+ Bidi Transceivers SMF 20km for Cisco SFP-10G-BXD-I/SFP-10G-BXU-I

$55.99



Cisco SFP-10/25G-CSR-S 10/25GBASE-SR SFP28 Transceiver Module 850nm 100m MMF LC picture

Cisco SFP-10/25G-CSR-S 10/25GBASE-SR SFP28 Transceiver Module 850nm 100m MMF LC

$91.91



GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module  picture

GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module

$6.90



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.90



Dell SFP-1G-T FCLF8521P2BTL-DL 1000Base-T SFP Transceiver Module XTY28 Lot of 10 picture

Dell SFP-1G-T FCLF8521P2BTL-DL 1000Base-T SFP Transceiver Module XTY28 Lot of 10

$49.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Cisco SFP-10G-SR-S SFP+ MMF 10GBase-SR 850nm Transceiver Module  picture

Cisco SFP-10G-SR-S SFP+ MMF 10GBase-SR 850nm Transceiver Module

$31.99



For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45 picture

For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45

$189.99



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.90