Results 1 to 2 of 2

Thread: 7.2.0 stored video config across boots earlier, now doesn't

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Smile 7.2.0 stored video config across boots earlier, now doesn't

    My Desktop Knoppix has to configure the system for Samsung SyncMaster 1360X768. Used Nvidia for x86 version 304.125 to set my monitor way back. It remained set that way.

    Recently, I thought that I should use my AMD's 64-bit operation rather than the Intel's 32bit. I downloaded the corresponding driver for x86-64. But doesn't get installed. Perhaps because Knoppix only addresses x86-64bit for intel processors. I had forgotten that it doesn't address the AMD processors.

    But because of this fiddling with my system, another problem crept up. To use the monitor I have to reinstall the driver upon every boot. Knoppix overwrites the drivers as well, not only the xorg.conf, upon subsequent boots and falls back on partial screen default even with vga=792 cheatcode.

    There is a line in /etc/X11/xorg.conf :
    # Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite your /etc/X11/xorg.conf
    It is also written that:
    # Monitor section auto-generated by KNOPPIX mlxprgconfig
    I have deleted the lines from xorg.conf but knoppix still overwrites the nvidia setup files. I had followed some other steps during the first set up, but did not write it down. So I can't use them now. I also searched the knoppix forum, but similar threads don't come to my notice.

    I have kept a back-up of my xorg.conf file as xorg.conf.rajiabando . When the full screen didn't activate during the subsequent boots, I have at init 3, used pico and copied the back-up as xorg.conf, but this simple task doesn't help. Knoppix is also overwriting some of the nvidia files.

    Why didn't it do so earlier, because of which I continued to have my full screen displays across all the subsequent boots?
    Why it isn't returning the full screens now?

    These are the questions upon which I am tearing my hair. [Don't worry, I can't, because I regularly have my hair cropped with my shaver ]

    Generally, I have notes of all my systems settings with me. This omission appears to be one of those idiotic decisions I have taken without thinking properly.

    Could I please be helped?
    Last edited by rajibando; 03-09-2018 at 07:19 AM. Reason: clarity, typo

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Some addition

    I failed to write that I have searched using:
    Code:
    sudo whereis mlxprgconfig
    Output:
    Code:
     mlxprgconfig:
    i.e., no existence.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper EX4200-48PX 48-Port PoE+ Switch 10/100/1000BaseT picture

Juniper EX4200-48PX 48-Port PoE+ Switch 10/100/1000BaseT

$180.00



Juniper EX3400-48T 48-Port GbE 4-Port SFP+ 2-Port QSFP+ 150W AC AFO Switch picture

Juniper EX3400-48T 48-Port GbE 4-Port SFP+ 2-Port QSFP+ 150W AC AFO Switch

$1595.00



JUNIPER NETWORKS Qfx5100-48s-afi 48Port 10 Gigabit Ethernet Switch *WORKING*NC picture

JUNIPER NETWORKS Qfx5100-48s-afi 48Port 10 Gigabit Ethernet Switch *WORKING*NC

$1599.99



Juniper Networks QFX5100-24Q-3AFO 24x QSFP+ Ports x2 QFX-EM-4Q +2x 650W-A picture

Juniper Networks QFX5100-24Q-3AFO 24x QSFP+ Ports x2 QFX-EM-4Q +2x 650W-A

$850.00



JUNIPER EX3300-24T - 24-Port 1Gb + 4-Port SFP 10Gb Ethernet Switch - Tested picture

JUNIPER EX3300-24T - 24-Port 1Gb + 4-Port SFP 10Gb Ethernet Switch - Tested

$145.00



JUNIPER QFX5100-48T-AFI - 48x 100/1000/10000 + 6x 40Gigabit QSFP+ Switch *READ* picture

JUNIPER QFX5100-48T-AFI - 48x 100/1000/10000 + 6x 40Gigabit QSFP+ Switch *READ*

$1768.80



JUNIPER NETWORKS EX2200-48P-4G PoE 48 port network Gigabit switch picture

JUNIPER NETWORKS EX2200-48P-4G PoE 48 port network Gigabit switch

$68.00



Juniper Networks EX4200-48P 48-Port PoE Ethernet Switch w/ Dual Power Supplies  picture

Juniper Networks EX4200-48P 48-Port PoE Ethernet Switch w/ Dual Power Supplies

$59.99



Juniper EX3300-24P 24 Port Switch picture

Juniper EX3300-24P 24 Port Switch

$160.00



Juniper EX3300-48P 48 Port PoE+ Gigabit Switch - SAME DAY SHIPPING  picture

Juniper EX3300-48P 48 Port PoE+ Gigabit Switch - SAME DAY SHIPPING

$349.99