I failed to write that I have searched using:Output:Code:sudo whereis mlxprgconfigi.e., no existence.Code:mlxprgconfig:
My Desktop Knoppix has to configure the system for Samsung SyncMaster 1360X768. Used Nvidia for x86 version 304.125 to set my monitor way back. It remained set that way.
Recently, I thought that I should use my AMD's 64-bit operation rather than the Intel's 32bit. I downloaded the corresponding driver for x86-64. But doesn't get installed. Perhaps because Knoppix only addresses x86-64bit for intel processors. I had forgotten that it doesn't address the AMD processors.
But because of this fiddling with my system, another problem crept up. To use the monitor I have to reinstall the driver upon every boot. Knoppix overwrites the drivers as well, not only the xorg.conf, upon subsequent boots and falls back on partial screen default even with vga=792 cheatcode.
There is a line in /etc/X11/xorg.conf :It is also written that:# Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite your /etc/X11/xorg.conf
I have deleted the lines from xorg.conf but knoppix still overwrites the nvidia setup files. I had followed some other steps during the first set up, but did not write it down. So I can't use them now. I also searched the knoppix forum, but similar threads don't come to my notice.# Monitor section auto-generated by KNOPPIX mlxprgconfig
I have kept a back-up of my xorg.conf file as xorg.conf.rajiabando . When the full screen didn't activate during the subsequent boots, I have at init 3, used pico and copied the back-up as xorg.conf, but this simple task doesn't help. Knoppix is also overwriting some of the nvidia files.
Why didn't it do so earlier, because of which I continued to have my full screen displays across all the subsequent boots?
Why it isn't returning the full screens now?
These are the questions upon which I am tearing my hair. [Don't worry, I can't, because I regularly have my hair cropped with my shaver ]
Generally, I have notes of all my systems settings with me. This omission appears to be one of those idiotic decisions I have taken without thinking properly.
Could I please be helped?
Last edited by rajibando; 03-09-2018 at 07:19 AM. Reason: clarity, typo
I failed to write that I have searched using:Output:Code:sudo whereis mlxprgconfigi.e., no existence.Code:mlxprgconfig:
Supermicro 2U 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server
$249.99
HP ProLiant MicroServer Gen 8, Pentium G2020T, 10GB RAM, No OS, 2 HDD Caddies
$211.61
1U Supermicro Firewall Router Jumpbox 6x 10GB Ethernet E3-1270 V3 32GB RAM 2x PS
$140.00
1U Server Dual Low Power Xeon E5-2640 V4 90W 20 Cores DDR4 ECC RAM 4x 10GB-T
$111.20
HP ProLiant Microserver Gen 8 Intel Mini Server (NO HDDs) Power Tested AS IS
$199.95
HPE MicroServer G10+ v2 G6405 16GNHP Server P69102-005
$385.00
Supermicro Mini-1U SuperServer 505-2 Intel 2.4GHz 16GB RAM - pfSense Compatible
$220.48
$100.00
SUPERMICRO 514-4 1019S-WR Server INTEL XEON E3-1270 V5 64GB SEE NOTES
$149.99
Supermicro 2U Server X9DRI-LN4F 2x Xeon E5-2690 2.9ghz | 64GB | 12x Trays
$249.99