Have a look at this post
Problem is: I HD-installed knoppix/debian (running fine) and then some day my windows crashed and had to be reinstalled.
An of course it erased lilo and now I cannot access my knoppix/debian anymore. I tried to reinstall lilo, using the knoppix CD but no luck yet, it just doesn´t let me write the MBR even as root...
Any hints?
Have a look at this post
Other ideas you might try:
1) See if you can install LILO to a floppy to get you started (good idea to have a boot floppy anyways)
2) Boot to Windows and download LOADLIN.exe (have to search the net for it). After familiarizing yourself with it, use your Knoppix CD to copy your kernel image to your Windows disk. You should then be able to get to Linux from Windows.
Once you are back in your hard drive Linux installation, you can then run /sbin/lilo and it should re-write itself and all will be well.
Hope this helps,
Joe
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99