--What happens with boot: ' linux vga=normal '?
Originally Posted by fatso
Everything seems to go according to plan, until I get past the initial stages and the OS should be starting up....at which point all I get is a black screen and no cd activity at all.
All the detection stages seem fine too. I tried a myriad of "cheats" from the full knoppix version, different screen resolutions, etc......and....nothing.
BTW: I have the latest version of Damn Small Linux.
Anybody got any suggestions?
Here's my hardware setup:
P4 2.53 ghz
ASUS P4PE motherboard
512 mb RAM
onboard SoundMax
Radeon 7500 64mb video
linksys nic
SAMPO AlphaScan LC monitor
Yamaha 2200E CD-R/RW
All of the above hardware works fine on the full knoppix version. I'd LOVE to be able to carry this around with me in my pocket to show non-linux users how simple it can be....help me spread the gospel, folks!![]()
--What happens with boot: ' linux vga=normal '?
Originally Posted by fatso
thanks for your reply!
I tried your suggestion, and got the same result.
btw: typing "linux vga=normal" gives the message "Cannot find kernel"
I have to use "knoppix vga=normal"
I suspect I'm doomed due to a lack of driver support for my video...it is a "Damn small linux", after all.Can't expect mega drivers in something so scaled-down.
...unless you have other ideas?![]()
I have EXACTLY the same problem, I think it's something to so with the P4PE as I too have one.
Does it say something about not being able to setup PCI devices due to conflicts right at the start of bootup? Mine does.
I'll get back to you if I find a way of fixing it.
Yup...I get that PCI conflict message too.Originally Posted by Colsey2001
Likewise...if I find a solution, I'll let ya know.![]()
--Try ' knoppix vga=normal pci=biosirq '.
Originally Posted by Colsey2001
It may also be due to the kernel version used in the ISO. The DSL team recently rolled back their kernel version to keep up with older hardware. This also means that newer hardware support vanished (with the exception of some extension applications). The last version that supported the newer hardware was DSL 2.1b, which used the 2.4.31 kernel. Whereas the current release uses the 2.4.26 kernel.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate HDD Barracuda 2TB Internal Hard Drive 7200RPM 64MB 3.5" ST2000DM001
$19.89
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.15
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00