I have had terrible trouble with 7.4.2 and 8.1.0 on a Dell XPS9360. Whether booting from the KNOPPIX DVD (burn iso) or from a boot USB (I use Pendrive's Universal-USB-Installer v. 1.9.8.0, there may be other or later versions) all I got was a blank screen. But a certain amount of whirring suggested to me that the live version was in fact progressing and available. After a lot of messing about with vga=xxx in the KERNEL stanza in /boot/isolinux/isolinux.cfg I iterated to the best, sparsest and most portable version of this configuration file that I have EVER had. It reads
DEFAULT console
TIMEOUT 40
PROMPT 1
LABEL console
KERNEL linux
APPEND initrd=minirt.gz vga=893 lang=uk 1
LABEL video
KERNEL linux
APPEND initrd=minirt.gz vga=893 lang=uk #
By portable I mean this works on an ancient (really ancient) Samsung, any number of Dells in all configurations / ages, likewise Fujitsus. All screens from 800x600 to 1920x1080.
Still can't get 8.1.0 to work using a boot USB (DVD is fine). The architecture dictated by Pendrive leads to a configuration location error ("Can't find ..") from the very start. Even mimicking the geography of the 7.4.2 boot USB does not mend this.
Fergus
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$239.99
HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY
$280.00
Dell PowerEdge MX740C Blade Server CTO Chassis H730P
$299.00
CISCO UCSB-B200-M3 UCS B200 M3 BLADE SERVER 2x Xeon E5-2650 2GHz 256GB RAM
$143.65
Dell PowerEdge FC830 blade server with 4x processors E5-4669v3 no memory
$189.00
Dell PowerEdge FC830 blade server with 4 socket no mem no procs 4x heatsink
$99.00
Cisco UCS-B200-M3 Blade Server 2x E5-2620 2.00 GHz 384GB RAM
$50.00
Dell PowerEdge M630 / HHB Server Module w 2x Intel E5-2680 & Dell P3V42 No HDD
$69.99
Dell PowerEdge M620 Blade Server 64GB RAM - NO HARD DRIVES
$44.99
Dell PowerEdge M620 Blade Server Module BAREBONES (NO CPU, RAM, HDD, CADDY)
$26.24